Measurements (mm)× 1in kit
- Outer diameterOD81.5 mm
- Inner diameterID61 mm
- Length10.3 mm
Centre tubeOD × ID × length, mm11.1 × 8.2 × 1012.7 × 9.8 × 10× 2 / 2
Whiteline front steering coupling bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit1 bushing, 4 tubes, 4 bolts, 4 washers, 4 nuts
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this steering coupling bush kit
The Whiteline W11066 front steering coupling bush kit induces positive steering precision and feedback. Whiteline's advanced synthetic elastomer bushings have core characteristics that ensure superior elasticity, memory and outright durability.
Utilizing Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory, and outright durability induce positive steering precision and feedback.
Note - 10mm Thick
Application
- CHRYSLER VALIANT 1962-1962 - RV1
- CHRYSLER VALIANT 1962-1976 - SV1-VK
- CHRYSLER VALIANT 1962-1982 - CL, CM
- CHRYSLER VALIANT CHARGER 1971-1976 - VH, VJ, VK
- CHRYSLER VALIANT CHARGER 1976-1979 - CL
- HOLDEN H SERIES 1971-1976 - H SERIES HQ, HJ AND WAGON
- HOLDEN H SERIES 1971-1976 - H SERIES HQ, HJ UTE, VAN AND CAB CHASSIS
- HOLDEN H SERIES 1976-1980 - H SERIES HX, HZ AND WAGON
- HOLDEN H SERIES 1976-1980 - H SERIES HX, HZ UTE, VAN AND CAB CHASSIS
- HOLDEN MONARO 1974-1976 - HQ, HJ
- HOLDEN MONARO 1976-1980 - HX, HZ
- HOLDEN STATESMAN 1980-1985 - WB
- HOLDEN WB 1980-1985 - WB UTE AND VAN
Whiteline W11066
Specifications
Kit
| Kit type | Front Steering Coupling Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 1 Bushing, 4 Tubes, 4 Bolts, 4 Washers, 4 Nuts |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W11066 |
|---|---|
| EAN | 9319924348992 |
Whiteline W11066
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W11066 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W11066
Vehicle fitment
14 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- 10mm thick
| Vehicle | Years | Position |
|---|---|---|
| Chrysler Valiant ChargerCL | 1976–1979 | Front |
| Chrysler Valiant ChargerVH, VJ, VK | 1971–1976 | Front |
| Chrysler ValiantCL-CM | 1976–1981 | Front |
| Chrysler ValiantSV1-VK | 1962–1976 | Front |
| HDT StatesmanWB Magnum | 1980–1985 | Front |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One Tonner | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Front |
| Holden MonaroHQ, HJ | 1971–1976 | Front |
| Holden MonaroHX, HZ | 1976–1980 | Front |
| Holden StatesmanHQ, HJ | 1971–1976 | Front |
| Holden StatesmanHX, HZ | 1976–1980 | Front |
| Holden StatesmanWB | 1980–1985 | Front |
| Holden WBUte and Panel Van | 1980–1985 | Front |
No vehicles match.
Universal listing (not a vehicle)
Steering Coupling - Bushing Kit. OD=81.5, PCD=61, Thickness=10.3mm, Bolt Dia=5/16 and 3/8
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
