- Outer diameterOD27 mm
- Inner diameterID15.8 mm
- Length31.2 mm
- Flange thicknessFL4.5 mm
- Flange outer diameterFLOD29.8 mm
Whiteline shock absorber
Key specs
- PositionFront axle
- Install time1 hour
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this shock absorber
The Whiteline W33336 shock absorber bushing kit uses superior formulation shock bushings that enhance the performance of new and used shock absorbers. Advances in shock absorbers, and demands for improved travel and load bearing, have placed extra importance and stress on shock absorber bushings.
Whiteline W33336
Specifications
Kit
| Kit type | Shock Absorber - Bushing Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1 hour |
| Wheel alignment required | Yes |
Identifiers
| SKU | W33336 |
|---|---|
| EAN | 9319924381333 |
Whiteline W33336
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W33336
Vehicle fitment
10 vehiclesFor most vehicles this part is sold as Shock Absorber - Bushing Kit. 10 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
| Vehicle | Years | Position |
|---|---|---|
| HDT StatesmanWB MagnumSold as: Shock Absorber - Lower Bushing Kit | 1980–1985 | Front |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One TonnerSold as: Shock Absorber - Lower Bushing Kit, Shock Absorber - Upper Bushing Kit | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGONSold as: Shock Absorber - Lower Bushing Kit | 1971–1976 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGONSold as: Shock Absorber - Lower Bushing Kit | 1976–1980 | Front |
| Holden MonaroHQ, HJSold as: Shock Absorber - Lower Bushing Kit | 1971–1976 | Front |
| Holden MonaroHX, HZSold as: Shock Absorber - Lower Bushing Kit | 1976–1980 | Front |
| Holden StatesmanHQ, HJSold as: Shock Absorber - Lower Bushing Kit | 1971–1976 | Front |
| Holden StatesmanHX, HZSold as: Shock Absorber - Lower Bushing Kit | 1976–1980 | Front |
| Holden StatesmanWBSold as: Shock Absorber - Lower Bushing Kit | 1980–1985 | Front |
| Holden WBUte and Panel VanSold as: Shock Absorber - Lower Bushing Kit, Shock Absorber - Upper Bushing KitSuits models to - 1983 | 1980–1985 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.


















