Size 1× 2in kit
- Outer diameterOD41.5 mm
- Inner diameterID11.9 mm
- Length15 mm
- Flange thicknessFL2.5 mm
- Flange outer diameterFLOD18.2 mm
Size 2× 2in kit
- Outer diameterOD66.1 mm
- Inner diameterID11.9 mm
- Length21.3 mm
Whiteline front strut mount bush kit
Key specs
- PositionFront axle
- Install time1.5 hours
- Supplied as1 kit6 bushings, 4 washers
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this strut mount bush kit
The Whiteline W44115 front strut mount bush kit suits hardworking or lifted commercial and 4x4 vehicles, which tend to suffer premature wear of the upper strut mount and shock absorber bushings. The kit contains a new strut top, upper strut mount pads and shock absorber pin bushings to restore the strut mount to as new condition.
Note - Suits models 04/2013 - on with full wire coil - includes top spring pad
Whiteline W44115
Specifications
Kit
| Kit type | Front Strut Mount Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 6 Bushings, 4 Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W44115 |
|---|---|
| EAN | 9319924465415 |
Whiteline W44115
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 2in kit
- Outer diameterOD117 mm
- Inner diameterID80 mm
- Length38 mm
- Flange thicknessFL25.5 mm
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W44115 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W44115
Vehicle fitment
10 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front3 vehicle-specific notes
Applies to every vehicle unless flagged
- Includes top spring pad
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Holden Colorado 7RGSuits models 03/2013 - on with full wire coil - Includes top spring pad | 2012–2016 | Front |
| Holden ColoradoRG 2WDSuits Hi-Rider models - Suits models 04/2013 - 06/2016 with full wire coil - Includes top spring pad | 2012–2020 | Front |
| Holden ColoradoRG 4WD & 2WD Hi-RiderSuits models 04/2013 - 06/2016 with full wire coil - Includes top spring pad | 2012–2020 | Front |
| Isuzu D-MAXTFR III, RG01 2WD | 2019–on | Front |
| Isuzu D-MAXTFS III, RG01 4WD | 2019–on | Front |
| Isuzu MU-XUCR, RJ 2WD | 2021–on | Front |
| Isuzu MU-XUCR, RJ 4WD | 2021–on | Front |
| Isuzu MU-XUCS, RF 4WD | 2013–2021 | Front |
| Mazda BT-50TF, RG04 2WD | 2020–on | Front |
| Mazda BT-50TF, RG04 4WD | 2020–on | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
ISUZU D-MAX 2020-ON TF 4WD
