Measurements (mm)× 4in kit
- Outer diameterODAI33.5mmAII32.5mm
- Inner diameterID22.2 mm
- Length33.5 mm
- Flange thicknessFL5.5 mm
- Flange outer diameterFLOD39 mm
Centre tubeOD × ID × length, mm22.2 × 17.2 × 33× 4
Whiteline front upper control arm, inner bush kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit4 shell bushings, 4 tubes, 4 washers
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The Whiteline W51018 front upper control arm inner bush kit is designed to greatly increase control and confidence, the perfect, complete upgrade. Worn bushings have a huge influence on vehicle stability, steering precision and braking efficiency, so replacing them restores as-new condition. Whiteline's advanced synthetic elastomer bushings have core characteristics that ensure superior elasticity, memory and outright durability.
Worn front control arm bushings have a huge influence on vehicle stability, steering precision, and braking efficiency. Replace worn bushings to as new condition utilizing Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory, and outright durability for all forms of driving applications.
Application
- HOLDEN H SERIES 1969-1971 - H SERIES HT, HG
- HOLDEN H SERIES 1971-1976 - H SERIES HQ, HJ AND WAGON
- HOLDEN H SERIES 1971-1976 - H SERIES HQ, HJ UTE, VAN AND CAB CHASSIS
- HOLDEN H SERIES 1976-1980 - H SERIES HX, HZ AND WAGON
- HOLDEN H SERIES 1976-1980 - H SERIES HX, HZ UTE, VAN AND CAB CHASSIS
- HOLDEN MONARO 1969-1971 - MONARO HT, HG
- HOLDEN MONARO 1974-1976 - HQ, HJ
- HOLDEN MONARO 1976-1980 - HX, HZ
- HOLDEN STATESMAN 1980-1985 - WB
- HOLDEN SUNBIRD 1977-1978 - LX
- HOLDEN SUNBIRD 1978-1980 - SUNBIRD UC
- HOLDEN TORANA 1971-1975 - LC, LJ 6CYL
- HOLDEN TORANA 1975-1978 - LH, LX SUNBIRD
- HOLDEN TORANA 1974-1978 - LH, LX
- HOLDEN TORANA 1978-1979 - UC
- HOLDEN TORANA GTR XU1 1970-1974 - LJ
- HOLDEN WB 1980-1985 - WB UTE AND VAN
Whiteline W51018
Specifications
Kit
| Kit type | Front Upper Control Arm - Inner Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Shell Bushings, 4 Tubes, 4 Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W51018 |
|---|---|
| EAN | 9319924351527 |
Whiteline W51018
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W51018 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W51018
Vehicle fitment
14 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front1 vehicle-specific note
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| HDT StatesmanWB Magnum | 1980–1985 | Front |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One Tonner | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Front |
| Holden H SeriesHT, HG | 1969–1971 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Front |
| Holden MonaroHQ, HJ | 1971–1976 | Front |
| Holden MonaroHT, HG | 1968–1971 | Front |
| Holden MonaroHX, HZ | 1976–1980 | Front |
| Holden StatesmanHQ, HJ | 1971–1976 | Front |
| Holden StatesmanHX, HZ | 1976–1980 | Front |
| Holden StatesmanWB | 1980–1985 | Front |
| Holden ToranaLC, LJ, TASuits 6cyl models | 1969–1974 | Front |
| Holden ToranaLH, LX, UC | 1974–1980 | Front |
| Holden WBUte and Panel Van | 1980–1985 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
