Measurements (mm)× 4in kit
- Outer diameterOD23.5 mm
- Inner diameterID16 mm
- Length26 mm
- Flange thicknessFL3 mm
- Flange outer diameterFLOD29.5 mm
Centre tubeOD × ID × length, mm16 × 12.8 × 53× 2
Whiteline front control arm, inner bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The Whiteline W52081 front control arm inner bush kit is designed to maximise tyre contact with the road, improving cornering and grip, the perfect, complete upgrade. Worn bushings have a huge influence on vehicle stability, steering precision and braking efficiency, so replacing them restores as-new condition. Whiteline's advanced synthetic elastomer bushings have core characteristics that ensure superior elasticity, memory and outright durability.
Worn front control arm bushings have a huge influence on vehicle stability, steering precision, and braking efficiency. Replace worn bushings to as new condition utilizing Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory, and outright durability for all forms of driving applications.
Note - Installs into the original shell
Application
- FORD FAIRLANE 1967-1969 - FAIRLANE ZA, ZB
- FORD FAIRMONT 1965-1966 - XP
- FORD FAIRMONT 1966-1969 - XR, XT
- FORD FALCON 1960-1966 - XK-XP
- FORD FALCON 1966-1969 - XR, XT
- FORD USA MUSTANG 1964-1973 - CLASSIC 1ST GEN
Whiteline W52081
Specifications
Kit
| Kit type | Front Control Arm - Inner Bush Kit (Re-Use Shell) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W52081 |
|---|---|
| EAN | 9319924352784 |
Whiteline W52081
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W52081 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W52081
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front1 vehicle-specific note
Applies to every vehicle unless flagged
- Fitter friendly design
- Installs into original shell
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford FairmontXP Sedan | 1965–1966 | Front |
| Ford FairmontXP Wagon | 1965–1966 | Front |
| Ford FalconXK-XP | 1960–1966 | Front |
| Ford MustangClassic 1st Gen29mm OD - Suits models to - 1967 - Installs into original shell | 1964–1973 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
