Measurements (mm)× 2in kit
- Outer diameterODAI41.2mmAII40.3mm
- Inner diameterID19 mmO/S
- Length61 mm
- Flange thicknessFL6.4 mm
Centre tubeOD × ID × length, mm19 × 12.2 × 61× 2
Whiteline front lower control arm, inner bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit2 shell bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this part
The Whiteline W52490 front lower control arm inner bush kit is designed to enhance steering response, delivering sharper handling and more predictable vehicle dynamics, the perfect, complete upgrade. Worn bushings have a huge influence on vehicle stability, steering precision and braking efficiency, so replacing them restores as-new condition. Whiteline's advanced synthetic elastomer bushings have core characteristics that ensure superior elasticity, memory and outright durability.
Worn front control arm bushings have a huge influence on vehicle stability, steering precision, and braking efficiency. Replace worn bushings to as new condition utilizing Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory, and outright durability for all forms of driving applications.
Note - Performance Alignment - angled and offset to support high positive caster
Application
- HOLDEN CALAIS 1985-1988 - CALAIS VK, VL
- HOLDEN CALAIS 1988-1991 - CALAIS VN
- HOLDEN CALAIS 1991-1993 - CALAIS VP
- HOLDEN CAPRICE 1990-1994 - CAPRICE VQ
- HOLDEN COMMODORE 1978-1988 - VB, VC, VH, VK, VL WAGON (INCL HDT)
- HOLDEN COMMODORE 1978-1988 - VB, VC, VH, VK, VL (INCL HDT)
- HOLDEN COMMODORE 1988-1993 - VN, VP, VG WAGON AND UTE
- HOLDEN COMMODORE 1988-1993 - VN, VP
- HOLDEN STATESMAN 1990-1994 - STATESMAN VQ
- HSV CLUBSPORT 1989-1991 - CLUBSPORT VN
- HSV CLUBSPORT 1993-1994 - CLUBSPORT VP
- HSV COMMODORE 1988-1989 - COMMODORE GROUP A VL
- HSV COMMODORE 1989-1991 - COMMODORE VN, VP
- HSV COMMODORE 1989-1993 - COMMODORE GROUP A VN
- HSV MALOO 1990-1993 - MALOO VG, VP
- HSV SENATOR 1992-1993 - SENATOR VP
- TOYOTA LEXCEN 1989-1993 - LEXCEN T1 WAGON
- TOYOTA LEXCEN 1989-1993 - LEXCEN T1 SOLID AXLE
- TOYOTA LEXCEN 1989-1993 - LEXCEN T1 IRS
Whiteline W52490
Alignment
- Alignment affectedCaster
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
Whiteline W52490
Specifications
Kit
| Kit type | Front Lower Control Arm - Inner Bush Kit (Angled) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Shell Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W52490 |
|---|---|
| EAN | 9319924353118 |
Whiteline W52490
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W52490 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W52490
Vehicle fitment
22 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Angled and offset for high positive caster
| Vehicle | Years | Position |
|---|---|---|
| HDT CalaisVK, VL | 1984–1986 | Front |
| HDT CommodoreVC, VH, VK, VL | 1980–1987 | Front |
| HDT CommodoreVN Aero, Group 3 | 1988–1991 | Front |
| Holden CalaisVK, VL | 1984–1988 | Front |
| Holden CalaisVN | 1988–1991 | Front |
| Holden CalaisVP | 1991–1993 | Front |
| Holden CapriceVQ | 1990–1994 | Front |
| Holden CommodoreVB, VC, VH, VK, VL (incl.HDT) | 1978–1988 | Front |
| Holden CommodoreVN, VP Sedan | 1988–1993 | Front |
| Holden CommodoreVN, VP, VG Wagon and Ute | 1988–1993 | Front |
| Holden StatesmanVQ | 1990–1994 | Front |
| HSV ClubsportVN | 1989–1991 | Front |
| HSV ClubsportVP | 1991–1993 | Front |
| HSV CommodoreVL GROUP A | 1988–1989 | Front |
| HSV CommodoreVN GROUP A | 1990–1991 | Front |
| HSV CommodoreVN, VP | 1989–1993 | Front |
| HSV LSVG, VP | 1991–1993 | Front |
| HSV MalooVG, VP | 1990–1993 | Front |
| HSV SenatorVP | 1992–1993 | Front |
| HSV StatesmanVQ | 1990–1993 | Front |
| Toyota LexcenVN, VP Sedan | 1987–1993 | Front |
| Toyota LexcenVN, VP Wagon | 1987–1993 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
