Measurements (mm)× 2in kit
- Outer diameterOD63.3 mm
- Inner diameterID26.3 mm
- Length54.5 mm
- Flange thicknessFL11.8 mm
- Flange outer diameterFLOD33.3 mm
Centre tubeOD × ID × length, mm27 × 14.3 × 54× 2
Whiteline front lower control arm, rear bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit2 shell bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The Whiteline W53436 front lower control arm rear bush kit is designed to maximise tyre contact with the road, improving cornering and grip, the perfect, complete upgrade. Worn bushings have a huge influence on vehicle stability, steering precision and braking efficiency, so replacing them restores as-new condition. Whiteline's advanced synthetic elastomer bushings have core characteristics that ensure superior elasticity, memory and outright durability.
Worn front control arm bushings have a huge influence on vehicle stability, steering precision, and braking efficiency. Replace worn bushings to as new condition utilizing Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory, and outright durability for all forms of driving applications.
Application
- HYUNDAI ELANTRA 2000-2006 - ELANTRA XD
- HYUNDAI ELANTRA LAVITA 2001-2004 - ELANTRA LAVITA FC
- HYUNDAI GETZ 2002-2011 - GETZ TB
- HYUNDAI TIBURON 2001-2009 - TIBURON GK
- KIA CERATO 2004-2009 - CERATO LD
Whiteline W53436
Specifications
Kit
| Kit type | Front Lower Control Arm - Rear Bush Kit (63mm) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Shell Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W53436 |
|---|---|
| EAN | 9319924384150 |
Whiteline W53436
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W53436 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W53436
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front2 vehicle-specific notes
Applies to every vehicle unless flagged
- Standard Alignment
- 63mm OD
- Suits models 08/2002
- on
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Hyundai Elantra LavitaFC | 2001–2010 | Front |
| Hyundai ElantraXD | 2000–2006 | Front |
| Hyundai GetzTBStandard Alignment - 63mm OD | 2002–2010 | Front |
| Hyundai TiburonGK | 2002–2009 | Front |
| KIA CeratoLDStandard Alignment | 2004–2008 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
