Measurements (mm)× 4in kit
- Outer diameterOD44.4 mm
- Inner diameterID21.7 mm
- Length40.6 mm
- Flange thicknessFL4.2 mm
- Flange outer diameterFLOD50.8 mm
Centre tubeOD × ID × length, mm22.2 × 18.2 × 85× 2
Whiteline front lower control arm bush kit
Key specs
- PositionFront axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this lower control arm bush kit
The Whiteline W53446 front lower control arm bush kit (rear) is designed to ensure long-lasting durability, no matter the purpose, the perfect, complete upgrade. Worn bushings have a huge influence on vehicle stability, steering precision and braking efficiency, so replacing them restores as-new condition. Whiteline's advanced synthetic elastomer bushings have core characteristics that ensure superior elasticity, memory and outright durability.
Worn front control arm bushings have a huge influence on vehicle stability, steering precision, and braking efficiency. Replace worn bushings to as new condition utilizing Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory, and outright durability for all forms of driving applications.
Note - Fitter friendly design - must remove OEM shell
Application
- HOLDEN COLORADO 2008-2012 - RC 2WD
- HOLDEN COLORADO 2008-2012 - RC 4WD
- HOLDEN FRONTERA 1999-2004 - FRONTERA MX
- HOLDEN JACKAROO 1985-1992 - UBS16, 17, 55
- HOLDEN JACKAROO / MONTEREY 1992-2004 - UBS25, 26, 69, 73
- HOLDEN RODEO 1988-2003 - TF 4WD
- ISUZU D-MAX 2008-2012 - TFS 1st Gen 4WD
- ISUZU D-MAX 2008-2012 - TFR 1st Gen 2WD
- ISUZU MU 1998-2004 - MU UES
- ISUZU VEHICROSS 1997-2002 - VEHICROSS
- ISUZU WIZARD 1998-2002 - WIZARD MU
Whiteline W53446
Specifications
Kit
| Kit type | Front Lower Control Arm Bush Kit (Rear) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W53446 |
|---|---|
| EAN | 9319924384907 |
Whiteline W53446
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W53446 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W53446
Vehicle fitment
21 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front6 vehicle-specific notes
Applies to every vehicle unless flagged
- Fitter friendly design
- Must remove OEM shell
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Chevrolet ColoradoRC 2WDFitter friendly design - Suits Hi-Rider models - Must remove OEM shell | 2003–2012 | Front |
| Chevrolet ColoradoRC 4WD | 2003–2012 | Front |
| Holden ColoradoRC 2WDFitter friendly design - Suits Hi-Rider models - Must remove OEM shell | 2008–2012 | Front |
| Holden ColoradoRC 4WD | 2008–2012 | Front |
| Holden FronteraMX | 1999–2004 | Front |
| Holden Jackaroo / MontereyUBS II | 1992–2004 | Front |
| Holden JackarooUBS I | 1981–1992 | Front |
| Holden RodeoRA 2WDFitter friendly design - Suits Hi-Rider models - Must remove OEM shell | 2003–2008 | Front |
| Holden RodeoRA 4WD & 2WD Hi-RiderFitter friendly design | 2003–2008 | Front |
| Holden RodeoTFS 4WDFitter friendly design | 1988–2003 | Front |
| Isuzu BighornUBS I | 1984–1991 | Front |
| Isuzu BighornUBS II | 1992–2004 | Front |
| Isuzu D-MAXTFR I 2WDFitter friendly design - Suits Hi-Rider models - Must remove OEM shell | 2002–2012 | Front |
| Isuzu D-MAXTFS I 4WD | 2002–2012 | Front |
| Isuzu MUMU7 | 1998–2002 | Front |
| Isuzu RodeoTFR, TFS | 2007–2012 | Front |
| Isuzu TrooperUBS | 1981–1991 | Front |
| Isuzu TrooperUBS II | 1991–2004 | Front |
| Isuzu WizardMU | 1995–2002 | Front |
| Opel MontereyUSB25,26,73 | 1991–2003 | Front |
| Vauxhall MontereyUSB25,26,73 | 1991–2003 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
