Measurements (mm)× 4in kit
- Outer diameterOD41.4 mm
- Inner diameterID29.5 mm
- Length36.5 mm
- Flange thicknessFL9.5 mm
Centre tubeOD × ID × length, mm29.5 × 11.9 × 71× 2
Whiteline rear control arm, inner toe kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The Whiteline W61309S rear control arm inner toe kit is a single bolt design rear toe kit for the inner control arm. It includes a bush removal tool. Independent rear suspension can wear the rear tyres unevenly, especially when lowered or when towing, and this kit improves the rear wheel alignment settings to save replacing costly tyres.
This IRS suspension system suffers from uneven rear tyre wear especially when lowered or when towing. The Whiteline 2-point camber/toe correction kits improve rear wheel alignment settings and save you on replacing costly tyres. This kit comes with a bush removal tool for quicker installation.
Note - Single bolt design - toe adjustment - includes removal tool
Application
- HOLDEN ADVENTRA 2003-2004 - VY
- HOLDEN ADVENTRA 2004-2009 - VZ
- HOLDEN CALAIS 1991-1993 - VP
- HOLDEN CALAIS 1993-1997 - VR, VS
- HOLDEN CALAIS 1997-2000 - VT
- HOLDEN CALAIS 2000-2002 - VX
- HOLDEN CAPRICE 1990-1994 - VQ
- HOLDEN CAPRICE 1994-1999 - VR, VS
- HOLDEN CAPRICE 1999-2003 - WH
- HOLDEN COMMODORE 1988-1993 - VN, VP SEDAN
- HOLDEN COMMODORE 1993-1997 - VR, VS SEDAN
- HOLDEN COMMODORE 1997-2000 - VT SEDAN AND WAGON
- HOLDEN COMMODORE 2000-2002 - VX SEDAN AND WAGON
- HOLDEN COMMODORE 2000-2002 - VU UTE
- HOLDEN STATESMAN 1990-1994 - VQ
- HOLDEN STATESMAN 1994-1999 - VR, VS
- HOLDEN STATESMAN 1999-2003 - WH
- HSV AVALANCHE 2003-2006 - Y SERIES, Z SERIES
- HSV CLUBSPORT 1993-1994 - VP
- HSV CLUBSPORT 1993-1997 - VR, VS SEDAN
- HSV CLUBSPORT 1997-2000 - VT
- HSV CLUBSPORT 2000-2002 - VX
- HSV GRANGE 1996-1998 - VS
- HSV GRANGE 1999-2003 - WH
- HSV GTS 1994-1997 - GTS VR, VS
- HSV GTS 1997-2000 - GTS VT
- HSV GTS 2000-2001 - GTS VX
- HSV MALOO 2001-2002 - VU
- HSV MANTA 1995-1997 - VS SEDAN
- HSV MANTA 1997-1999 - VT
- HSV SENATOR 1992-1993 - VP
- HSV SENATOR 1993-1997 - VR, VS
- HSV SENATOR 1997-1999 - VT
- HSV SENATOR 2000-2002 - VX
- HSV SV300 2001-2001 - SV300 VX
- HSV SV6000 2005-2006 - SV6000 Z SERIES
- HSV XU6 1998-2000 - XU6 VT
- HSV XU6 2000-2002 - XU6 VX
- HSV XU8 1999-1999 - XU8 VT
- TOYOTA LEXCEN 1989-1993 - T1 SEDAN IRS
- TOYOTA LEXCEN 1993-1997 - T2 SEDAN IRS
Whiteline W61309S
Alignment
- Alignment affectedCamber / Toe
- Adjustment typeEccentric
- Adjustable on the carYes
A wheel alignment is needed after fitting.
Whiteline W61309S
Specifications
Kit
| Kit type | Rear Control Arm - Inner Toe Kit (IRS) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes, 2 Bolts, 4 Nuts, Removal Tool |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W61309S |
|---|---|
| EAN | 9319924353835 |
Whiteline W61309S
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W61309S is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W61309S
Vehicle fitment
75 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear43 vehicle-specific notesSold as differs on 32 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm - Inner Bushing Kit, Control Arm - Outer Bushing Kit. 32 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Single bolt design
- 2deg IRS adjusting camber kit
- Includes removal tool
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| HDT CommodoreVT SportSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1997–2000 | Rear |
| HDT CommodoreVX Areo SignatureSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 07/2001 - includes removal tool | 2000–2002 | Rear |
| Holden AdventraVYSold as: Control Arm - Outer Bushing Kit | 2003–2004 | Rear |
| Holden AdventraVZSold as: Control Arm - Outer Bushing Kit | 2004–2009 | Rear |
| Holden CalaisVPSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1991–1993 | Rear |
| Holden CalaisVR, VSSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1993–1997 | Rear |
| Holden CalaisVTSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1997–2000 | Rear |
| Holden CalaisVXSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 07/2001 - includes removal tool | 2000–2002 | Rear |
| Holden CalaisVYSold as: Control Arm - Outer Bushing Kit | 2002–2004 | Rear |
| Holden CalaisVZSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| Holden CalibraYESingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1991–1997 | Rear |
| Holden CapriceVQSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1990–1994 | Rear |
| Holden CapriceVR, VSSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1994–1999 | Rear |
| Holden CapriceWHSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 07/2001 - includes removal tool | 1999–2003 | Rear |
| Holden CapriceWKSold as: Control Arm - Outer Bushing Kit | 2003–2004 | Rear |
| Holden CapriceWLSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| Holden CommodoreVN, VP SedanSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Suits IRS models - includes removal tool | 1988–1993 | Rear |
| Holden CommodoreVR, VS SedanSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Suits IRS models - includes removal tool | 1993–1997 | Rear |
| Holden CommodoreVT Sedan and WagonSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1997–2000 | Rear |
| Holden CommodoreVU UteSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 2000–2002 | Rear |
| Holden CommodoreVX Sedan and WagonSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 07/2001 - includes removal tool | 2000–2002 | Rear |
| Holden CommodoreVY Sedan and WagonSold as: Control Arm - Outer Bushing Kit | 2002–2004 | Rear |
| Holden CommodoreVY UteSold as: Control Arm - Outer Bushing Kit | 2002–2004 | Rear |
| Holden CommodoreVZ Sedan and WagonSold as: Control Arm - Outer Bushing Kit | 2004–2007 | Rear |
| Holden CommodoreVZ UteSold as: Control Arm - Outer Bushing Kit | 2004–2007 | Rear |
| Holden MonaroV2Sold as: Control Arm - Outer Bushing Kit | 2001–2004 | Rear |
| Holden MonaroVZSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| Holden StatesmanVQSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1990–1994 | Rear |
| Holden StatesmanVR, VSSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1994–1999 | Rear |
| Holden StatesmanWHSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 07/2001 - includes removal tool | 1999–2003 | Rear |
| Holden StatesmanWKSold as: Control Arm - Outer Bushing Kit | 2003–2004 | Rear |
| Holden StatesmanWLSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| HSV AvalancheY SERIES WAGONSold as: Control Arm - Outer Bushing Kit | 2003–2004 | Rear |
| HSV AvalancheZ SERIES WAGONSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| HSV CapriceVR, VSSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1994–1996 | Rear |
| HSV ClubsportVPSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1991–1993 | Rear |
| HSV ClubsportVR-VS SEDANSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1993–1997 | Rear |
| HSV ClubsportVTSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1997–2000 | Rear |
| HSV ClubsportVXSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 08/2001 - includes removal tool | 2000–2002 | Rear |
| HSV ClubsportY SERIESSold as: Control Arm - Outer Bushing Kit | 2002–2004 | Rear |
| HSV ClubsportZ SERIESSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| HSV Coupe 4V2, Z SERIESSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| HSV GrangeVSSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1996–1999 | Rear |
| HSV GrangeWHSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 08/2001 - includes removal tool | 1999–2003 | Rear |
| HSV GrangeWKSold as: Control Arm - Outer Bushing Kit | 2003–2004 | Rear |
| HSV GrangeWLSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| HSV GTOV2 COUPESold as: Control Arm - Outer Bushing Kit | 2001–2004 | Rear |
| HSV GTOZ SERIES COUPESold as: Control Arm - Outer Bushing Kit | 2002–2007 | Rear |
| HSV GTSV2 COUPESold as: Control Arm - Outer Bushing Kit | 2001–2004 | Rear |
| HSV GTSVR, VSSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1993–1997 | Rear |
| HSV GTSVTSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1997–2000 | Rear |
| HSV GTSVXSold as: Control Arm - Outer Bushing Kit | 2000–2002 | Rear |
| HSV GTSY SERIESSold as: Control Arm - Outer Bushing Kit | 2002–2007 | Rear |
| HSV MalooVUSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 2001–2002 | Rear |
| HSV MalooY SERIESSold as: Control Arm - Outer Bushing Kit | 2002–2004 | Rear |
| HSV MalooZ SERIESSold as: Control Arm - Outer Bushing Kit | 2004–2007 | Rear |
| HSV MantaVS SEDANSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1995–1997 | Rear |
| HSV MantaVTSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1997–1999 | Rear |
| HSV SenatorVPSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1992–1993 | Rear |
| HSV SenatorVR, VSSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1993–1997 | Rear |
| HSV SenatorVTSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1997–2000 | Rear |
| HSV SenatorVXSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 08/2001 - includes removal tool | 2000–2002 | Rear |
| HSV SenatorY SERIESSold as: Control Arm - Outer Bushing Kit | 2002–2004 | Rear |
| HSV SenatorZ SERIESSold as: Control Arm - Outer Bushing Kit | 2004–2006 | Rear |
| HSV StatesmanVQSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1990–1993 | Rear |
| HSV StatesmanVR, VSSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1994–1996 | Rear |
| HSV SV300VXSold as: Control Arm - Outer Bushing Kit | 2001–2001 | Rear |
| HSV SV6000Z SERIESSold as: Control Arm - Outer Bushing Kit | 2005–2006 | Rear |
| HSV SV99VTSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1999–2000 | Rear |
| HSV XU6VTSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1998–2000 | Rear |
| HSV XU6VXSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool, Suits models to - 08/2001 - includes removal tool | 2000–2002 | Rear |
| HSV XU8VTSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1999–1999 | Rear |
| Opel VectraASingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Includes removal tool | 1988–1995 | Rear |
| Toyota LexcenVN, VP SedanSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Suits IRS models - includes removal tool | 1987–1993 | Rear |
| Toyota LexcenVR, VS SedanSingle bolt design - 2deg IRS adjusting camber kit, IRS adjusting toe kit - Suits IRS models - includes removal tool | 1993–1997 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Fitment position: Front
Sale price$855.00
Fitment position: Front
Sale price$855.00
Fitment position: Front
Sale price$855.00
Fitment position: Front
Sale price$855.00
