Measurements (mm)× 8in kit
- Outer diameterOD31 mm
- Inner diameterID16 mm
- Length25 mm
- Flange thicknessFL9 mm
Centre tubeOD × ID × length, mm16 × 10.2 × 50× 6
Whiteline rear lower control arm bush kit
Key specs
- PositionRear axle
- Install time4 hours
- Supplied as1 kit12 bushings, 6 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this lower control arm bush kit
The Whiteline W62005 rear lower control arm bush kit is designed to ensure long-lasting durability, no matter the purpose, the perfect, complete upgrade. Failed suspension bushings can cause uneven tyre wear, unbalanced braking and a less predictable vehicle in corners, and replacing them gives a safer, more predictable vehicle. It uses Whiteline synthetic elastomer bushings made for superior elasticity, memory and long lasting durability.
Suffering uneven tyre wear, unbalanced braking, or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Note - Suits models with forged arm - includes shock absorber lower bushings
Application
- HONDA CIVIC 1988-1993 - CIVIC IV GEN EC, ED, EE
- HONDA CIVIC 1991-1995 - EG, EH
- HONDA CIVIC 1994-2000 - CIVIC VI GEN EJ, EK, EM
- HONDA CONCERTO 1988-1993 - CONCERTO HW, MA
- HONDA CRX 1987-1992 - CR-X ED, EE
- HONDA CRX 1992-1998 - EG, EH
- HONDA INTEGRA 1993-2001 - DC2, DC4
- HONDA INTEGRA 1999-2001 - TYPE R DC2
Whiteline W62005
Specifications
Kit
| Kit type | Rear Lower Control Arm Bush Kit (Cast Arm) |
|---|---|
| Kits required | 1 |
| Components per kit | 12 Bushings, 6 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W62005 |
|---|---|
| EAN | 9319924354443 |
Whiteline W62005
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W62005 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W62005
Vehicle fitment
5 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Suits models with cast arm
- Includes shock absorber lower bushings
| Vehicle | Years | Position |
|---|---|---|
| Honda Civic4th Gen EC, ED, EE | 1987–1993 | Rear |
| Honda Civic5th Gen EG, EH | 1991–1995 | Rear |
| Honda Civic6th Gen EJ, EK, EM | 1994–2001 | Rear |
| Honda Civic6th Gen EK9 TYPE R | 1994–2001 | Rear |
| Honda IntegraDC2 & DC4 Vti-R / Type R | 1993–2001 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
