Measurements (mm)× 2in kit
- Outer diameterOD40.6 mm
- Inner diameterID21.3 mm
- Length44 mm
- Flange thicknessFL10 mm
- Flange outer diameterFLOD45.4 mm
Centre tubeOD × ID × length, mm22.2 × 12.2 × 45× 2
Whiteline rear upper control arm bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit2 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this upper control arm bush kit
The Whiteline W62192 rear upper control arm bush kit (outer) is designed to boost handling and performance, while optimising suspension geometry, the perfect, complete upgrade. Failed suspension bushings can cause uneven tyre wear, unbalanced braking and a less predictable vehicle in corners, and replacing them gives a safer, more predictable vehicle. It uses Whiteline synthetic elastomer bushings made for superior elasticity, memory and long lasting durability.
Suffering uneven tyre wear, unbalanced braking, or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Application
- MITSUBISHI LANCER 1992-1996 - EVO 1, 2, 3
- MITSUBISHI LANCER 1992-1996 - CC Sedan and Coupe
- MITSUBISHI LANCER 1992-1996 - CC GSR
- MITSUBISHI LANCER 1995-2004 - CE Sedan, Coupe and Hatch
- MITSUBISHI MIRAGE 1995-2004 - CE - CP
- PROTON M21 1995-2000 - M21 C99
- PROTON PERSONA 1996-2004 - PERSONA C96, C97
- PROTON SATRIA 1997-2007 - SATRIA C97, C98
- PROTON WIRA 1995-2002 - WIRA C97, C98
Whiteline W62192
Specifications
Kit
| Kit type | Rear Upper Control Arm Bush Kit (Outer) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W62192 |
|---|---|
| EAN | 9319924450558 |
Whiteline W62192
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W62192 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W62192
Vehicle fitment
11 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear1 vehicle-specific noteSold as differs on 4 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower Front - Inner Bushing Kit, Control Arm Upper - Outer Bushing Kit. 4 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Fitter friendly design
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Mitsubishi LancerCC GSRSold as: Control Arm Upper - Outer Bushing Kit | 1992–1996 | Rear |
| Mitsubishi LancerCC Sedan and Coupe | 1992–1996 | Rear |
| Mitsubishi LancerCE Sedan, Coupe and HatchSuits models to - 01/1999 | 1995–2004 | Rear |
| Mitsubishi LancerEVO 1, 2, 3Sold as: Control Arm Upper - Outer Bushing Kit | 1992–1996 | Rear |
| Mitsubishi MirageCE - CP | 1995–2004 | Rear |
| Proton M21Sedan & CoupeSold as: Control Arm Upper - Outer Bushing Kit | 1995–2000 | Rear |
| Proton PersonaC9_M | 1996–2005 | Rear |
| Proton PersonaC9_SSold as: Control Arm Upper - Outer Bushing Kit | 1994–2003 | Rear |
| Proton SatriaC9_M | 1996–2005 | Rear |
| Proton WiraC9_C, C9_S | 1995–2000 | Rear |
| Proton WiraWira | 2000–2002 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
