Measurements (mm)× 2in kit
- Outer diameterOD40 mm
- Inner diameterID12.3 mm
- Length50 mm
- Flange thicknessFL8.4 mm
- Flange outer diameterFLOD44 mm
Whiteline rear upper control arm bearing kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit2 bearings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this upper control arm bearing kit
The Whiteline W62717 is a rear upper control arm bearing kit (outer). A common serviceable item, worn joints exhibit excess movement and are commonly diagnosed simply from knocking and rattling noises coming from the upright or hub area. Whiteline's replacement joints boast superior internal joint structure for improved performance and durability.
A common serviceable item, worn joints exhibit excess movement and are commonly diagnosed simply from knocking and rattling noises coming from the upright or hub area. If worn and not replaced, these joints can have a significant negative impact on wheel alignment and resulting uneven tyre wear or scrub. Whiteline's replacement joints boast superior internal joint structure for improved performance and durability. The outer housing also features a chamfered leading edge for ease of installation.
Note - 40mm OD - Please measure before ordering, May not fit GEN F LSA
Application
- HOLDEN CALAIS 2006-2013 - VE
- HOLDEN CALAIS 2013-2018 - VF
- HOLDEN CAPRICE 2006-2013 - WM
- HOLDEN CAPRICE 2013-2018 - WN
- HOLDEN COMMODORE 2006-2013 - VE
- HOLDEN COMMODORE 2013-2017 - VF
- HOLDEN STATESMAN 2006-2013 - WM
- HSV CLUBSPORT 2006-2013 - CLUBSPORT E SERIES
- HSV CLUBSPORT 2013-2017 - F
- HSV GRANGE 2006-2013 - GRANGE WM
- HSV GRANGE 2013-2016 F
- HSV GTS 2006-2013 - E SERIES
- HSV MALOO 2007-2013 - MALOO E SERIES
- HSV MALOO 2013-2017 - MALOO GEN F
- HSV SENATOR 2006-2013 - SENATOR E SERIES
- HSV SENATOR 2013-2017 - SENATOR GEN F
- HSV W427 2008-2009 - W427 E SERIES
Whiteline W62717
Specifications
Kit
| Kit type | Rear Upper Control Arm Bearing Kit (Outer) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bearings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W62717 |
|---|---|
| EAN | 9319924468003 |
Whiteline W62717
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
3 year / 60,000kmWhiteline ball joints, tie rod ends, bearings, links and springs are covered by a 3 year / 60,000km warranty against manufacturing defects. The warranty covers replacement of the original component only.
This product: W62717 is protected by a 3 year / 60,000km warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W62717
Vehicle fitment
24 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| HDT CommodoreInterceptor Retro | 2006–2013 | Rear |
| HDT CommodoreVC Retro | 2006–2013 | Rear |
| HDT CommodoreVH Retro | 2006–2013 | Rear |
| HDT CommodoreVK Retro | 2006–2013 | Rear |
| HDT CommodoreVK Retro | 2015–2017 | Rear |
| HDT CommodoreVL Retro | 2006–2013 | Rear |
| Holden CalaisVE | 2006–2013 | Rear |
| Holden CalaisVF | 2013–2018 | Rear |
| Holden CapriceWM | 2006–2013 | Rear |
| Holden CapriceWN | 2013–2017 | Rear |
| Holden CommodoreVE Sedan, Wagon and Ute | 2006–2013 | Rear |
| Holden CommodoreVF Sedan, Wagon and Ute | 2013–2017 | Rear |
| Holden StatesmanWM | 2006–2010 | Rear |
| HSV ClubsportE SERIES | 2006–2013 | Rear |
| HSV ClubsportGEN F | 2013–2017 | Rear |
| HSV GrangeWM | 2007–2013 | Rear |
| HSV GrangeWN | 2013–2016 | Rear |
| HSV MalooE SERIES | 2007–2013 | Rear |
| HSV MalooGEN F | 2013–2017 | Rear |
| HSV SenatorE SERIES | 2006–2013 | Rear |
| HSV SenatorGEN F | 2013–2016 | Rear |
| HSV W427E SERIES | 2008–2013 | Rear |
| Vauxhall VXR8E SERIES | 2007–2013 | Rear |
| Vauxhall VXR8 MalooE SERIES | 2008–2013 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
