Measurements (mm)× 4in kit
- Outer diameterOD37 mm
- Inner diameterID25 mm
- Length33.8 mm
- Flange thicknessFL14.4 mm
- Flange outer diameterFLOD44.6 mm
Centre tubeOD × ID × length, mm25.4 × 14.2 × 69× 2
Whiteline rear lower control arm bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this lower control arm bush kit
The Whiteline W63154A rear lower control arm bush kit (inner) is designed to ensure long-lasting durability, no matter the purpose, the perfect, complete upgrade. Failed suspension bushings can cause uneven tyre wear, unbalanced braking and a less predictable vehicle in corners, and replacing them gives a safer, more predictable vehicle. It uses Whiteline synthetic elastomer bushings made for superior elasticity, memory and long lasting durability.
Suffering uneven tyre wear, unbalanced braking, or a less predictable rear end while cornering. It could be your toe arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Application
- CHEVROLET CAMARO 2009-2015 - 5th Gen
- HOLDEN CALAIS 2006-2013 - VE
- HOLDEN CALAIS 2013-2018 - VF
- HOLDEN CAPRICE 2006-2013 - WM
- HOLDEN CAPRICE 2013-2018 - WN
- HOLDEN COMMODORE 2006-2013 - VE
- HOLDEN COMMODORE 2013-2017 - VF
- HOLDEN STATESMAN 2006-2013 - WM
- HSV CLUBSPORT 2006-2013 - CLUBSPORT E SERIES
- HSV CLUBSPORT 2013-2017 - F
- HSV GRANGE 2006-2013 - GRANGE WM
- HSV GRANGE 2013-2016 F
- HSV GTS 2006-2013 - E SERIES
- HSV GTS 2013-2017 - GTS GEN F
- HSV MALOO 2007-2013 - MALOO E SERIES
- HSV MALOO 2013-2017 - MALOO GEN F
- HSV SENATOR 2006-2013 - SENATOR E SERIES
- HSV SENATOR 2013-2017 - SENATOR GEN F
- HSV W427 2008-2009 - W427 E SERIES
Whiteline W63154A
Specifications
Kit
| Kit type | Rear Lower Control Arm Bush Kit (Inner) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W63154A |
|---|---|
| EAN | 9319924395828 |
Whiteline W63154A
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W63154A is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W63154A
Vehicle fitment
28 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| Chevrolet Camaro5th Gen | 2009–2015 | Rear |
| HDT CommodoreInterceptor Retro | 2006–2013 | Rear |
| HDT CommodoreVC Retro | 2006–2013 | Rear |
| HDT CommodoreVH Retro | 2006–2013 | Rear |
| HDT CommodoreVK Retro | 2006–2013 | Rear |
| HDT CommodoreVK Retro | 2015–2017 | Rear |
| HDT CommodoreVL Retro | 2006–2013 | Rear |
| Holden CalaisVE | 2006–2013 | Rear |
| Holden CalaisVF | 2013–2018 | Rear |
| Holden CapriceWM | 2006–2013 | Rear |
| Holden CapriceWN | 2013–2017 | Rear |
| Holden CommodoreVE Sedan, Wagon and Ute | 2006–2013 | Rear |
| Holden CommodoreVF Sedan, Wagon and Ute | 2013–2017 | Rear |
| Holden StatesmanWM | 2006–2010 | Rear |
| HSV ClubsportE SERIES | 2006–2013 | Rear |
| HSV ClubsportGEN F | 2013–2017 | Rear |
| HSV GrangeWM | 2007–2013 | Rear |
| HSV GrangeWN | 2013–2016 | Rear |
| HSV GTSE SERIES | 2006–2013 | Rear |
| HSV GTSGEN F | 2013–2017 | Rear |
| HSV GTSGTSR GEN F | 2013–2017 | Rear |
| HSV MalooE SERIES | 2007–2013 | Rear |
| HSV MalooGEN F | 2013–2017 | Rear |
| HSV SenatorE SERIES | 2006–2013 | Rear |
| HSV SenatorGEN F | 2013–2016 | Rear |
| HSV W427E SERIES | 2008–2013 | Rear |
| Vauxhall VXR8E SERIES | 2007–2013 | Rear |
| Vauxhall VXR8 MalooE SERIES | 2008–2013 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
