Measurements (mm)× 4in kit
- Outer diameterOD36.9 mm
- Inner diameterID25.5 mm
- Length24.4 mm
- Flange thicknessFL5.4 mm
- Flange outer diameterFLOD46 mm
Centre tubeOD × ID × length, mm25.4 × 12.3 × 51× 2
Whiteline rear lower control arm bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this lower control arm bush kit
The Whiteline W63155 rear lower control arm bush kit (outer) is designed to deliver a balanced mix of comfort, precision, and durability, the perfect, complete upgrade. Failed suspension bushings can cause uneven tyre wear, unbalanced braking and a less predictable vehicle in corners, and replacing them gives a safer, more predictable vehicle.
Suffering uneven tyre wear, unbalanced braking, or a less predictable rear end while cornering. It could be your toe arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Note - suits models to - 06/2009 without spherical bearing in the lower hub
Application
- CHEVROLET CAMARO 2009-2015 - 5th Gen
- HOLDEN CALAIS 2006-2013 - VE
- HOLDEN CALAIS 2013-2018 - VF
- HOLDEN CAPRICE 2006-2013 - WM
- HOLDEN CAPRICE 2013-2018 - WN
- HOLDEN COMMODORE 2006-2013 - VE
- HOLDEN COMMODORE 2013-2017 - VF
- HOLDEN STATESMAN 2006-2013 - WM
- HSV CLUBSPORT 2006-2013 - CLUBSPORT E SERIES
- HSV CLUBSPORT 2013-2017 - F
- HSV GRANGE 2006-2013 - GRANGE WM
- HSV GRANGE 2013-2016 F
- HSV GTS 2006-2013 - E SERIES
- HSV GTS 2013-2017 - GTS GEN F
- HSV MALOO 2007-2013 - MALOO E SERIES
- HSV MALOO 2013-2017 - MALOO GEN F
- HSV SENATOR 2006-2013 - SENATOR E SERIES
- HSV SENATOR 2013-2017 - SENATOR GEN F
- HSV W427 2008-2009 - W427 E SERIES
Whiteline W63155
Specifications
Kit
| Kit type | Rear Lower Control Arm Bush Kit (Outer) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W63155 |
|---|---|
| EAN | 9319924355075 |
Whiteline W63155
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W63155 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W63155
Vehicle fitment
28 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear1 vehicle-specific noteSold as differs on 10 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower Rear - Outer Bushing Kit, Trailing Arm Lower - Rear Bushing Kit. 10 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Standard Alignment
- Suits models to
- 06/2009 without bearing in hub
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Chevrolet Camaro5th GenStandard Alignment | 2009–2015 | Rear |
| HDT CommodoreInterceptor Retro | 2006–2013 | Rear |
| HDT CommodoreVC Retro | 2006–2013 | Rear |
| HDT CommodoreVH Retro | 2006–2013 | Rear |
| HDT CommodoreVK Retro | 2006–2013 | Rear |
| HDT CommodoreVK RetroSold as: Trailing Arm Lower - Rear Bushing Kit | 2015–2017 | Rear |
| HDT CommodoreVL Retro | 2006–2013 | Rear |
| Holden CalaisVE | 2006–2013 | Rear |
| Holden CalaisVFSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2018 | Rear |
| Holden CapriceWM | 2006–2013 | Rear |
| Holden CapriceWNSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2017 | Rear |
| Holden CommodoreVE Sedan, Wagon and Ute | 2006–2013 | Rear |
| Holden CommodoreVF Sedan, Wagon and UteSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2017 | Rear |
| Holden StatesmanWM | 2006–2010 | Rear |
| HSV ClubsportE SERIES | 2006–2013 | Rear |
| HSV ClubsportGEN FSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2017 | Rear |
| HSV GrangeWM | 2007–2013 | Rear |
| HSV GrangeWNSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2016 | Rear |
| HSV GTSE SERIES | 2006–2013 | Rear |
| HSV GTSGEN FSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2017 | Rear |
| HSV GTSGTSR GEN FSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2017 | Rear |
| HSV MalooE SERIES | 2007–2013 | Rear |
| HSV MalooGEN FSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2017 | Rear |
| HSV SenatorE SERIES | 2006–2013 | Rear |
| HSV SenatorGEN FSold as: Trailing Arm Lower - Rear Bushing Kit | 2013–2016 | Rear |
| HSV W427E SERIES | 2008–2013 | Rear |
| Vauxhall VXR8E SERIES | 2007–2013 | Rear |
| Vauxhall VXR8 MalooE SERIES | 2008–2013 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
