Measurements (mm)× 2in kit
- Outer diameterOD40.1 mm
- Inner diameterID22 mm
- Length49.2 mm
- Flange thicknessFL9.6 mm
- Flange outer diameterFLOD31.7 mm
Centre tubeOD × ID × length, mm22.2 × 12.2 × 50× 2
Whiteline rear lower control arm bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit2 shell bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this lower control arm bush kit
The Whiteline W63381 rear lower control arm bush kit (inner) is designed to enhance steering response, delivering sharper handling and more predictable vehicle dynamics, the perfect, complete upgrade. Failed suspension bushings can cause uneven tyre wear, unbalanced braking and a less predictable vehicle in corners, and replacing them gives a safer, more predictable vehicle.
Suffering uneven tyre wear, unbalanced braking, or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Note - Suits models with cast arm
Application
- HONDA CIVIC 2000-2005 - CIVIC VII GEN EP, ES, EU
- HONDA CIVIC 1999-2005 - CIVIC TYPE R VII GEN EP3
- HONDA CIVIC 2005-2012 - CIVIC VIII GEN FA, FD AND COUPE
- HONDA CIVIC 2007-2010 - CIVIC TYPE R VIII GEN FD2
- HONDA CR-V 1997-2001 - CR-V RD1-RD3
- HONDA CR-V 2001-2006 - CR-V RD4-RD7
- HONDA INTEGRA 2001-2007 - INTEGRA DC5
- HONDA INTEGRA 2001-2007 - INTEGRA TYPE R, TYPE S DC5
Whiteline W63381
Specifications
Kit
| Kit type | Rear Lower Control Arm Bush Kit (Inner) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Shell Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W63381 |
|---|---|
| EAN | 9319924383269 |
Whiteline W63381
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W63381 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W63381
Vehicle fitment
6 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear2 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Honda Civic7th Gen EP-EV | 2000–2006 | Rear |
| Honda Civic8th Gen FA, FD | 2005–2012 | Rear |
| Honda Civic8th Gen FD2 Type R | 2007–2010 | Rear |
| Honda CR-VRD1-RD3Suits models with cast arm | 1995–2002 | Rear |
| Honda CR-VRD4-RD7Suits models with cast arm | 2001–2007 | Rear |
| Honda IntegraDC5 Type R / RSX (Includes Type S) | 2001–2007 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
