Measurements (mm)× 8in kit
- Outer diameterOD43.5 mm
- Inner diameterID24 mm
- Length21.3 mm
- Flange thicknessFL5.8 mm
- Flange outer diameterFLOD54.9 mm
Centre tubeOD × ID × length, mm24 × 14.3 × 46.524 × 12.2 × 46.5× 2 / 2
Whiteline rear lower control arm bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit8 bushings, 4 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this lower control arm bush kit
The Whiteline W63382 rear lower control arm bush kit (outer) is designed to maximise tyre contact with the road, improving cornering and grip, the perfect, complete upgrade. Failed suspension bushings can cause uneven tyre wear, unbalanced braking and a less predictable vehicle in corners, and replacing them gives a safer, more predictable vehicle.
Suffering uneven tyre wear, unbalanced braking, or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Note - Suits models with cast arm - contains both 12mm and 14mm crush tubes
Application
- HONDA CIVIC 2000-2005 - CIVIC VII GEN EP, ES, EU
- HONDA CIVIC 1999-2005 - CIVIC TYPE R VII GEN EP3
- HONDA CR-V 1997-2001 - CR-V RD1-RD3
- HONDA CR-V 2001-2006 - CR-V RD4-RD7
Whiteline W63382
Specifications
Kit
| Kit type | Rear Lower Control Arm Bush Kit (Outer) |
|---|---|
| Kits required | 1 |
| Components per kit | 8 Bushings, 4 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W63382 |
|---|---|
| EAN | 9319924383276 |
Whiteline W63382
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W63382 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W63382
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear1 vehicle-specific noteSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Outer Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Contains both 12mm and 14mm crush tubes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Honda Civic7th Gen EP-EV | 2000–2006 | Rear |
| Honda CR-VRD1-RD3Sold as: Control Arm Lower Rear - Outer Bushing KitSuits models with cast arm - Contains both 12mm and 14mm crush tubes | 1995–2002 | Rear |
| Honda CR-VRD4-RD7 | 2001–2007 | Rear |
| Honda ElementYH | 2002–2011 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
