Measurements (mm)× 8in kit
- Outer diameterOD36.9 mm
- Inner diameterID25.5 mm
- Length24.4 mm
- Flange thicknessFL5.4 mm
- Flange outer diameterFLOD46 mm
Centre tubeOD × ID × length, mm25.4 × 12.2 × 51× 4
Whiteline lower control arm bush kit
Key specs
- PositionFront & rear
- Install time3 hours
- Supplied as1 kit8 bushings, 4 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this lower control arm bush kit
The Whiteline W63430 lower control arm camber kit is an economical way to correct alignment and prolong tyre life, especially on vehicles that are lowered, carry loads or run low-profile tyres. It replaces both outer control arm mounts.
Providing +/- 1.5deg camber adjustment WHITELINE'S kit is the economical solution for correcting alignment and prolonging tyre life, especially on vehicles that are lowered, load-carrying and/ or running expensive low-profile tyres.
Note - suits models to - 06/2009 without spherical bearing in the lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Application
- CHEVROLET CAMARO 2009-2015 - 5th Gen
- HOLDEN CALAIS 2006-2013 - VE
- HOLDEN CAPRICE 2006-2013 - WM
- HOLDEN COMMODORE 2006-2013 - VE
- HOLDEN STATESMAN 2006-2013 - WM
- HSV CLUBSPORT 2006-2013 - CLUBSPORT E SERIES
- HSV GRANGE 2006-2013 - GRANGE WM
- HSV GTS 2006-2013 - E SERIES
- HSV MALOO 2007-2013 - MALOO E SERIES
- HSV SENATOR 2006-2013 - SENATOR E SERIES
- HSV W427 2008-2009 - W427 E SERIES
Whiteline W63430
Alignment
- Alignment affectedCamber
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
Whiteline W63430
Specifications
Kit
| Kit type | Rear Lower Control Arm Bush Kit (Camber Kit) |
|---|---|
| Kits required | 1 |
| Components per kit | 8 Bushings, 4 Tubes |
Fitting
| Fitting position | Front & Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W63430 |
|---|---|
| EAN | 9319924391141 |
Diagram
Whiteline W63430
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyArm and bushes: lifetime. Ball joint: 3 year / 60,000km.This Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Arm and bushes: lifetime. Ball joint: 3 year / 60,000km.
This product: W63430 is protected by a lifetime warranty (ball joint: 3 year / 60,000km)
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W63430
Vehicle fitment
18 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front & Rear1 vehicle-specific note
Applies to every vehicle unless flagged
- Performance Alignment
- Suits models to
- 06/2009 without bearing in hub
- Adds +/- 1.5deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Chevrolet Camaro5th GenPerformance Alignment - Adds +/- 1.5deg camber | 2009–2015 | Front & rear |
| HDT CommodoreInterceptor Retro | 2006–2013 | Front & rear |
| HDT CommodoreVC Retro | 2006–2013 | Front & rear |
| HDT CommodoreVH Retro | 2006–2013 | Front & rear |
| HDT CommodoreVK Retro | 2006–2013 | Front & rear |
| HDT CommodoreVL Retro | 2006–2013 | Front & rear |
| Holden CalaisVE | 2006–2013 | Front & rear |
| Holden CapriceWM | 2006–2013 | Front & rear |
| Holden CommodoreVE Sedan, Wagon and Ute | 2006–2013 | Front & rear |
| Holden StatesmanWM | 2006–2010 | Front & rear |
| HSV ClubsportE SERIES | 2006–2013 | Front & rear |
| HSV GrangeWM | 2007–2013 | Front & rear |
| HSV GTSE SERIES | 2006–2013 | Front & rear |
| HSV MalooE SERIES | 2007–2013 | Front & rear |
| HSV SenatorE SERIES | 2006–2013 | Front & rear |
| HSV W427E SERIES | 2008–2013 | Front & rear |
| Vauxhall VXR8E SERIES | 2007–2013 | Front & rear |
| Vauxhall VXR8 MalooE SERIES | 2008–2013 | Front & rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
You may also like
Save $314.87
Fitment position: Front
Sale price$540.13
Regular price$855.00
Save $314.87
Fitment position: Front
Sale price$540.13
Regular price$855.00
Save $314.87
Fitment position: Front
Sale price$540.13
Regular price$855.00
Save $314.87
Fitment position: Front
Sale price$540.13
Regular price$855.00
