Measurements (mm)× 2in kit
- Outer diameterOD123 mm
- Inner diameterID98 mm
- Length24 mm
- Flange thicknessFL11 mm
Whiteline spring insulator
Key specs
- PositionVaries by vehicleShown per vehicle in the table
- Install time1.5 hours
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Fitting position differs between vehicles. Check the position shown for your vehicle in the table.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this spring insulator
The Whiteline W71472 spring insulator sits at the spring seat. Whiteline spring pads are an economical way to replace deteriorated original units, compensate for a vehicle loaded more on one side, or reach a preferred ride height.
Whether it's replacing deteriorated original units, compensating loading one side of a vehicle common to 4x4, or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Application
- HOLDEN CALAIS 1985-1988 - CALAIS VK, VL
- HOLDEN CALAIS 1988-1991 - CALAIS VN
- HOLDEN COMMODORE 1978-1988 - VB, VC, VH, VK, VL (INCL HDT)
- HOLDEN COMMODORE 1978-1988 - VB, VC, VH, VK, VL WAGON (INCL HDT)
- HOLDEN COMMODORE 1988-1993 - VN, VP, VG WAGON AND UTE
- HOLDEN COMMODORE 1988-1993 - VN, VP
- HOLDEN COMMODORE 1993-2000 - VR, VS WAGON AND UTE
- HOLDEN COMMODORE 1993-1997 - VR, VS
- HSV CLUBSPORT 1989-1991 - CLUBSPORT VN
- HSV CLUBSPORT 1993-1997 - CLUBSPORT VR, VS WAGON
- HSV COMMODORE 1988-1989 - COMMODORE GROUP A VL
- HSV COMMODORE 1989-1991 - COMMODORE VN, VP
- HSV COMMODORE 1989-1993 - COMMODORE GROUP A VN
- HSV MALOO 1990-1993 - MALOO VG, VP
- HSV MALOO 1993-2000 - MALOO VR, VS
- HSV MANTA 1995-1997 - MANTA VS WAGON
- TOYOTA LEXCEN 1989-1993 - LEXCEN T1 WAGON
- TOYOTA LEXCEN 1989-1993 - LEXCEN T1 SOLID AXLE
- TOYOTA LEXCEN 1993-1997 - LEXCEN T2 WAGON
- TOYOTA LEXCEN 1993-1997 - LEXCEN T2 SOLID AXLE
Whiteline W71472
Specifications
Kit
| Kit type | Rear Spring Insulator |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Fitting
| Fitting position | Varies by vehicle |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W71472 |
|---|---|
| EAN | 9319924355709 |
Diagram
Whiteline W71472
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
3 year / 60,000kmWhiteline ball joints, tie rod ends, bearings, links and springs are covered by a 3 year / 60,000km warranty against manufacturing defects. The warranty covers replacement of the original component only.
This product: W71472 is protected by a 3 year / 60,000km warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
W71472
Vehicle fitment
28 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
Position varies by vehicle (Front 3, Rear 25)4 vehicle-specific notesSold as differs on 3 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Coil Spring Pad - Upper Bushing Kit. 3 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Standard ride height
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Alfa Romeo 33905Sold as: Coil Spring Pad - Lower Bushing Kit | 1989–1993 | Front |
| Alfa Romeo Alfasud901, 902, 904Sold as: Coil Spring Pad - Lower Bushing Kit | 1972–1989 | Front |
| Alfa Romeo Sprint902Sold as: Coil Spring Pad - Lower Bushing Kit | 1983–1987 | Front |
| HDT CalaisVK, VL | 1984–1986 | Rear |
| HDT CommodoreVC, VH, VK, VL | 1980–1987 | Rear |
| HDT CommodoreVN Aero, Group 3 | 1988–1991 | Rear |
| HDT CommodoreVS Aero | 1995–1997 | Rear |
| HDT CommodoreVS Magnum | 1995–1997 | Rear |
| Holden CalaisVK, VL | 1984–1988 | Rear |
| Holden CalaisVN | 1988–1991 | Rear |
| Holden CommodoreVB, VC, VH, VK, VL (incl.HDT) | 1978–1988 | Rear |
| Holden CommodoreVN, VP SedanSuits solid axle models | 1988–1993 | Rear |
| Holden CommodoreVN, VP, VG Wagon and Ute | 1988–1993 | Rear |
| Holden CommodoreVR, VS SedanSuits solid axle models | 1993–1997 | Rear |
| Holden CommodoreVR, VS Wagon and Ute | 1993–2000 | Rear |
| HSV ClubsportVN | 1989–1991 | Rear |
| HSV ClubsportVR-VS WAGON | 1993–1997 | Rear |
| HSV CommodoreVL GROUP A | 1988–1989 | Rear |
| HSV CommodoreVN GROUP A | 1990–1991 | Rear |
| HSV CommodoreVN, VP | 1989–1993 | Rear |
| HSV LSVG, VP | 1991–1993 | Rear |
| HSV MalooVG, VP | 1990–1993 | Rear |
| HSV MalooVR, VS | 1993–2000 | Rear |
| HSV MantaVS WAGON | 1995–1997 | Rear |
| Toyota LexcenVN, VP SedanSuits solid axle models | 1987–1993 | Rear |
| Toyota LexcenVN, VP Wagon | 1987–1993 | Rear |
| Toyota LexcenVR, VS SedanSuits solid axle models | 1993–1997 | Rear |
| Toyota LexcenVR, VS Wagon | 1993–1997 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
