Measurements (mm)× 2in kit
- Outer diameterOD115 mm
- Inner diameterID85 mm
- Length6 mm
Whiteline rear upper spring spacer
Key specs
- PositionRear axle
- Install time1.5 hours
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this upper spring spacer
The Whiteline W71474 rear upper spring spacer is an economical solution for replacing deteriorated original units. It also compensates for a vehicle loaded on one side, which is common on 4x4s, and helps achieve the preferred ride height.
Note - 6mm ride height increase
Whiteline W71474
Specifications
Kit
| Kit type | Rear Upper Spring Spacer (6mm) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W71474 |
|---|---|
| EAN | 9319924355723 |
Whiteline W71474
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W71474 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
W71474
Vehicle fitment
25 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear4 vehicle-specific notes
Applies to every vehicle unless flagged
- 6mm ride height increase
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| HDT CalaisVK, VL | 1984–1986 | Rear |
| HDT CommodoreVC, VH, VK, VL | 1980–1987 | Rear |
| HDT CommodoreVN Aero, Group 3 | 1988–1991 | Rear |
| HDT CommodoreVS Aero | 1995–1997 | Rear |
| HDT CommodoreVS Magnum | 1995–1997 | Rear |
| Holden CalaisVK, VL | 1984–1988 | Rear |
| Holden CalaisVN | 1988–1991 | Rear |
| Holden CommodoreVB, VC, VH, VK, VL (incl.HDT) | 1978–1988 | Rear |
| Holden CommodoreVN, VP SedanSuits solid axle models | 1988–1993 | Rear |
| Holden CommodoreVN, VP, VG Wagon and Ute | 1988–1993 | Rear |
| Holden CommodoreVR, VS SedanSuits solid axle models | 1993–1997 | Rear |
| Holden CommodoreVR, VS Wagon and Ute | 1993–2000 | Rear |
| HSV ClubsportVN | 1989–1991 | Rear |
| HSV ClubsportVR-VS WAGON | 1993–1997 | Rear |
| HSV CommodoreVL GROUP A | 1988–1989 | Rear |
| HSV CommodoreVN GROUP A | 1990–1991 | Rear |
| HSV CommodoreVN, VP | 1989–1993 | Rear |
| HSV LSVG, VP | 1991–1993 | Rear |
| HSV MalooVG, VP | 1990–1993 | Rear |
| HSV MalooVR, VS | 1993–2000 | Rear |
| HSV MantaVS WAGON | 1995–1997 | Rear |
| Toyota LexcenVN, VP SedanSuits solid axle models | 1987–1993 | Rear |
| Toyota LexcenVN, VP Wagon | 1987–1993 | Rear |
| Toyota LexcenVR, VS SedanSuits solid axle models | 1993–1997 | Rear |
| Toyota LexcenVR, VS Wagon | 1993–1997 | Rear |
No vehicles match.
Universal listing (not a vehicle)
Coil Spring Pad/Trim Packer - Bushing Kit. OD=115, ID=83, H=6mm
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
