Measurements (mm)× 2in kit
- Outer diameterOD130 mm
- Inner diameterID95 mm
- Length9 mm
Whiteline front spring spacer
Key specs
- PositionFront axle
- Install time1.5 hours
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this spring spacer
The Whiteline W71478 front spring spacer is an economical solution for replacing deteriorated original units. It also compensates for a vehicle loaded on one side, which is common on 4x4s, and helps achieve the preferred ride height.
Note - 8mm ride height increase
Whiteline W71478
Specifications
Kit
| Kit type | Front Spring Spacer (8mm) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W71478 |
|---|---|
| EAN | 9319924355761 |
Whiteline W71478
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W71478 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
W71478
Vehicle fitment
45 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notesSold as differs on 11 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Coil Spring Pad - Upper Bushing Kit. 11 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- 8mm ride height increase
| Vehicle | Years | Position |
|---|---|---|
| Ford FairlaneZA, ZB | 1967–1969 | Front |
| Ford FairlaneZC, ZD | 1969–1972 | Front |
| Ford FairlaneZF, ZG | 1972–1976 | Front |
| Ford FairlaneZH | 1976–1979 | Front |
| Ford FairlaneZJ | 1979–1982 | Front |
| Ford FairlaneZK, ZL | 1982–1988 | Front |
| Ford FairmontXA, XB Sedan and Coupe | 1972–1976 | Front |
| Ford FairmontXA, XB Wagon | 1972–1976 | Front |
| Ford FairmontXC Sedan and Coupe | 1976–1979 | Front |
| Ford FairmontXC Wagon | 1976–1979 | Front |
| Ford FairmontXD Sedan | 1979–1982 | Front |
| Ford FairmontXD Wagon | 1979–1982 | Front |
| Ford FairmontXE, XF Sedan | 1982–1988 | Front |
| Ford FairmontXE, XF Wagon | 1982–1988 | Front |
| Ford FairmontXP Sedan | 1965–1966 | Front |
| Ford FairmontXP Wagon | 1965–1966 | Front |
| Ford FairmontXR, XT Sedan | 1967–1969 | Front |
| Ford FairmontXR, XT Wagon | 1967–1969 | Front |
| Ford FairmontXW, XY Sedan | 1969–1972 | Front |
| Ford FairmontXW, XY Wagon | 1969–1972 | Front |
| Ford FalconXA, XB | 1972–1976 | Front |
| Ford FalconXC | 1976–1979 | Front |
| Ford FalconXD | 1979–1982 | Front |
| Ford FalconXE, XF Sedan | 1982–1988 | Front |
| Ford FalconXE, XF Wagon, Ute and Van | 1982–1993 | Front |
| Ford FalconXG Ute and Van (Shock Front End) | 1993–1996 | Front |
| Ford FalconXK-XP | 1960–1966 | Front |
| Ford FalconXR-XT | 1966–1969 | Front |
| Ford FalconXW, XY | 1969–1972 | Front |
| Ford LandauP5, P6 | 1973–1979 | Front |
| Ford LTDFC | 1979–1982 | Front |
| Ford LTDFD, FE | 1982–1988 | Front |
| Ford LTDP5, P6 | 1973–1979 | Front |
| Ford MustangClassic 1st GenSold as: Coil Spring Pad - Bushing Kit | 1964–1973 | Front |
| HDT StatesmanWB MagnumSold as: Coil Spring Pad - Lower Bushing Kit | 1980–1985 | Front |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One TonnerSold as: Coil Spring Pad - Lower Bushing Kit | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGONSold as: Coil Spring Pad - Lower Bushing Kit | 1971–1976 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGONSold as: Coil Spring Pad - Lower Bushing Kit | 1976–1980 | Front |
| Holden MonaroHQ, HJSold as: Coil Spring Pad - Lower Bushing Kit | 1971–1976 | Front |
| Holden MonaroHX, HZSold as: Coil Spring Pad - Lower Bushing Kit | 1976–1980 | Front |
| Holden StatesmanHQ, HJSold as: Coil Spring Pad - Lower Bushing Kit | 1971–1976 | Front |
| Holden StatesmanHX, HZSold as: Coil Spring Pad - Lower Bushing Kit | 1976–1980 | Front |
| Holden StatesmanWBSold as: Coil Spring Pad - Lower Bushing Kit | 1980–1985 | Front |
| Holden ToranaLH, LX, UC | 1974–1980 | Front |
| Holden WBUte and Panel VanSold as: Coil Spring Pad - Lower Bushing Kit | 1980–1985 | Front |
No vehicles match.
Universal listing (not a vehicle)
Coil Spring Pad/Trim Packer - Bushing Kit. OD=130, ID=95, H=8mm
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
