Measurements (mm)× 4in kit
- Outer diameterOD14.1 mm
- Inner diameterID7.4 mm
- Length9.5 mm
- Flange thicknessFL2 mm
- Flange outer diameterFLOD53.3 mm
Whiteline rear spring slipper pad bush kit
Key specs
- PositionRear axle
- Install time1.5 hours
- Supplied as1 kit4 bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this spring slipper pad bush kit
The Whiteline W72126 rear spring slipper pad bush kit is designed to balance comfort with performance while minimising noise and vibrations, the perfect, complete upgrade. Whiteline calls it a critical service item for any leaf sprung vehicle. Whiteline's signature black bushings are made tough, with outstanding abrasion resistance, high load bearing capability (4WDs, utes and towing) and chemical resistance to oil, grease, ozone and weathering.
Note - Insulator bushing between leafs
Whiteline W72126
Specifications
Kit
| Kit type | Rear Spring Slipper Pad Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W72126 |
|---|---|
| EAN | 9319924356225 |
Whiteline W72126
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W72126 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W72126
Vehicle fitment
11 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Insulator bushing between leafs
| Vehicle | Years | Position |
|---|---|---|
| Holden E SeriesEK, EJ, EH | 1961–1965 | Rear |
| Holden F SeriesFE, FC, FB | 1957–1961 | Rear |
| Holden F SeriesFX, FJ | 1948–1957 | Rear |
| Holden H SeriesHD, HR | 1965–1968 | Rear |
| Holden H SeriesHK | 1968–1969 | Rear |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One Tonner | 1971–1976 | Rear |
| Holden H SeriesHT, HG | 1969–1971 | Rear |
| Holden MonaroHT, HG | 1968–1971 | Rear |
| Holden RodeoTFR 2WD | 1988–2003 | Rear |
| Holden RodeoTFS 4WD | 1988–2003 | Rear |
| Holden WBUte and Panel Van | 1980–1985 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
