Measurements (mm)× 2in kit
- Outer diameterOD115 mm
- Inner diameterID83 mm
- Length8 mm
Whiteline rear upper spring spacer
Key specs
- PositionRear axle
- Install time1.5 hours
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this upper spring spacer
The Whiteline W72385 rear upper spring spacer is an economical solution for replacing deteriorated original units. It also compensates for a vehicle loaded on one side, which is common on 4x4s, and helps achieve the preferred ride height.
Whether it's replacing deteriorated original units, compensating for loading one side of a vehicle common to 4x4, or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Note - Standard ride height
Application
- HOLDEN CALAIS 1985-1988 - CALAIS VK, VL
- HOLDEN CALAIS 1988-1991 - CALAIS VN
- HOLDEN COMMODORE 1978-1988 - VB, VC, VH, VK, VL (INCL HDT)
- HOLDEN COMMODORE 1978-1988 - VB, VC, VH, VK, VL WAGON (INCL HDT)
- HOLDEN COMMODORE 1988-1993 - VN, VP, VG WAGON AND UTE
- HOLDEN COMMODORE 1988-1993 - VN, VP
- HOLDEN COMMODORE 1993-2000 - VR, VS WAGON AND UTE
- HOLDEN COMMODORE 1993-1997 - VR, VS
- HSV CLUBSPORT 1989-1991 - CLUBSPORT VN
- HSV CLUBSPORT 1993-1997 - CLUBSPORT VR, VS WAGON
- HSV COMMODORE 1988-1989 - COMMODORE GROUP A VL
- HSV COMMODORE 1989-1991 - COMMODORE VN, VP
- HSV COMMODORE 1989-1993 - COMMODORE GROUP A VN
- HSV MALOO 1990-1993 - MALOO VG, VP
- HSV MALOO 1993-2000 - MALOO VR, VS
- HSV MANTA 1995-1997 - MANTA VS WAGON
- TOYOTA LEXCEN 1989-1993 - LEXCEN T1 WAGON
- TOYOTA LEXCEN 1989-1993 - LEXCEN T1 SOLID AXLE
- TOYOTA LEXCEN 1993-1997 - LEXCEN T2 WAGON
- TOYOTA LEXCEN 1993-1997 - LEXCEN T2 SOLID AXLE
Whiteline W72385
Specifications
Kit
| Kit type | Rear Upper Spring Spacer |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W72385 |
|---|---|
| EAN | 9319924380497 |
Whiteline W72385
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W72385 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
W72385
Vehicle fitment
25 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear4 vehicle-specific notes
Applies to every vehicle unless flagged
- 8mm ride height increase, Standard ride height
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| HDT CalaisVK, VL | 1984–1986 | Rear |
| HDT CommodoreVC, VH, VK, VL | 1980–1987 | Rear |
| HDT CommodoreVN Aero, Group 3 | 1988–1991 | Rear |
| HDT CommodoreVS Aero | 1995–1997 | Rear |
| HDT CommodoreVS Magnum | 1995–1997 | Rear |
| Holden CalaisVK, VL | 1984–1988 | Rear |
| Holden CalaisVN | 1988–1991 | Rear |
| Holden CommodoreVB, VC, VH, VK, VL (incl.HDT) | 1978–1988 | Rear |
| Holden CommodoreVN, VP SedanSuits solid axle models | 1988–1993 | Rear |
| Holden CommodoreVN, VP, VG Wagon and Ute | 1988–1993 | Rear |
| Holden CommodoreVR, VS SedanSuits solid axle models | 1993–1997 | Rear |
| Holden CommodoreVR, VS Wagon and Ute | 1993–2000 | Rear |
| HSV ClubsportVN | 1989–1991 | Rear |
| HSV ClubsportVR-VS WAGON | 1993–1997 | Rear |
| HSV CommodoreVL GROUP A | 1988–1989 | Rear |
| HSV CommodoreVN GROUP A | 1990–1991 | Rear |
| HSV CommodoreVN, VP | 1989–1993 | Rear |
| HSV LSVG, VP | 1991–1993 | Rear |
| HSV MalooVG, VP | 1990–1993 | Rear |
| HSV MalooVR, VS | 1993–2000 | Rear |
| HSV MantaVS WAGON | 1995–1997 | Rear |
| Toyota LexcenVN, VP SedanSuits solid axle models | 1987–1993 | Rear |
| Toyota LexcenVN, VP Wagon | 1987–1993 | Rear |
| Toyota LexcenVR, VS SedanSuits solid axle models | 1993–1997 | Rear |
| Toyota LexcenVR, VS Wagon | 1993–1997 | Rear |
No vehicles match.
Universal listing (not a vehicle)
Coil Spring Pad/Trim Packer - Bushing Kit. OD=115, ID=83, H=8mm
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
