Measurements (mm)× 1in kit
- Outer diameterOD170 mm
- Inner diameterID115 mm
- Length48 mm
- Flange thicknessFL30 mm
Whiteline front spring spacer
Key specs
- PositionFront axle
- Install time1.5 hours
- Kits required21 bushing
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this spring spacer
The Whiteline W73405 front spring spacer is an economical solution for replacing deteriorated original units. It also compensates for a vehicle loaded on one side, which is common on 4x4s, and helps achieve the preferred ride height.
Note - 30mm ride height increase - must be installed to the bottom of coil spring
Whiteline W73405
Specifications
Kit
| Kit type | Front Spring Spacer (30mm) |
|---|---|
| Kits required | 2 |
| Components per kit | 1 Bushing |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W73405 |
|---|---|
| EAN | 9319924389681 |
Whiteline W73405
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W73405 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
W73405
Vehicle fitment
6 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- 30mm ride height increase
- Must be installed to the bottom of coil spring
| Vehicle | Years | Position |
|---|---|---|
| Ford MaverickDA Wagon (Coil Spring) | 1988–1994 | Front |
| Nissan PatrolGQ Y60 CAB CHASSIS (COIL FRONT AND REAR) | 1988–1997 | Front |
| Nissan PatrolGQ Y60 WAGON | 1988–1997 | Front |
| Nissan PatrolGU Y61 CAB CHASSIS (COIL FRONT AND LEAF REAR) | 1997–2016 | Front |
| Nissan PatrolGU Y61 CAB CHASSIS (COIL FRONT AND REAR) | 1997–2016 | Front |
| Nissan PatrolGU Y61 WAGON | 1997–2016 | Front |
No vehicles match.
Universal listing (not a vehicle)
Coil Spring Pad/Trim Packer - Bushing Kit. OD=170, ID=122, H=30mm
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
NISSAN PATROL 1988-1997 GQ Y60 WAGON
