Measurements (mm)× 1in kit
- Outer diameterOD180 mm
- Inner diameterID135 mm
- Length20 mm
Whiteline rear spring spacer
Key specs
- PositionRear axle
- Install time1.5 hours
- Kits required21 bushing
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this spring spacer
The Whiteline W73473 rear spring spacer is an economical solution for replacing deteriorated original units. It also compensates for a vehicle loaded on one side, which is common on 4x4s, and helps achieve the preferred ride height.
Note - 20mm ride height increase
Whiteline W73473
Specifications
Kit
| Kit type | Rear Spring Spacer (20mm) |
|---|---|
| Kits required | 2 |
| Components per kit | 1 Bushing |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W73473 |
|---|---|
| EAN | 9319924463657 |
Whiteline W73473
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W73473 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
W73473
Vehicle fitment
4 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- 20mm ride height increase
| Vehicle | Years | Position |
|---|---|---|
| Lexus LXLX470 (J100) | 1998–2008 | Rear |
| Toyota Land Cruiser100 Series | 1998–2007 | Rear |
| Toyota Land Cruiser105 Series | 1998–2007 | Rear |
| Toyota Land Cruiser80 Series | 1990–1997 | Rear |
No vehicles match.
Universal listing (not a vehicle)
Coil Spring Pad/Trim Packer - Bushing Kit. OD=180, ID=135, H=20mm
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
TOYOTA LAND CRUISER 1990-1998 80 SERIES
Fitment position: Front & Rear
Sale priceFrom $5,374.80
Fitment position: Front & Rear
Sale priceFrom $3,794.40
Fitment position: Front & Rear
Sale priceFrom $5,069.00
Fitment position: Front & Rear
Sale priceFrom $3,880.00
Fitment position: Front & Rear
Sale priceFrom $3,735.00
Fitment position: Front & Rear
Sale priceFrom $5,374.80
Fitment position: Front & Rear
Sale priceFrom $3,794.40