Measurements (mm)× 4in kit
- Outer diameterODAI47.3mmAII38.8mm
- Inner diameterID19 mm
- Length30 mm
- Flange thicknessFL2 mm
- Flange outer diameterFLOD22 mm
Centre tubeOD × ID × length, mm19 × 16.2 × 52× 2
Whiteline strut rod to chassis bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this strut rod to chassis bush kit
The Whiteline W81193 strut rod to chassis bush kit is designed to create a consistent drive no matter the surface, the perfect, complete upgrade. Worn suspension bushings affect braking performance, and these long-lasting synthetic elastomer bushings are made for a safer, more predictable vehicle. It uses Whiteline synthetic elastomer bushings made for superior elasticity, memory and long lasting durability.
Not many know but worn suspension bushings have an effect on braking performance. In particular, these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Whiteline W81193
Specifications
Kit
| Kit type | Strut Rod To Chassis Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W81193 |
|---|---|
| EAN | 9319924356805 |
Whiteline W81193
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W81193 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W81193
Vehicle fitment
12 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front4 vehicle-specific notes
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Toyota CelicaMA61, _A6_Suits models to - 08/1983 | 1981–1986 | Front |
| Toyota CelicaRA23, RA2816mm ID - 30mm L | 1976–1977 | Front |
| Toyota CelicaRA40 | 1977–1981 | Front |
| Toyota CelicaRA60-6516mm ID - 30mm L | 1981–1985 | Front |
| Toyota CelicaTA2216mm ID - 30mm L | 1971–1976 | Front |
| Toyota CorollaE20, E25, E26 | 1970–1974 | Front |
| Toyota CorollaE30, E35, E50, E55 | 1974–1981 | Front |
| Toyota CorollaE70, E71, E72 | 1979–1987 | Front |
| Toyota CorollaE86 | 1983–1987 | Front |
| Toyota Corolla SprinterE86 | 1983–1987 | Front |
| Toyota CoronaST141, RT142 | 1983–1987 | Front |
| Toyota CoronaXT130 | 1979–1983 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
