- Outer diameterOD37.5 mm
- Inner diameterID16 mm
- Length21.5 mm
- Flange thicknessFL7 mm
Whiteline front strut bar to chassis bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this strut bar to chassis bush kit
The Whiteline W81194 front strut bar to chassis bush kit is designed to maximise grip and stability for better control, the perfect, complete upgrade. Worn suspension bushings affect braking performance, and these long-lasting synthetic elastomer bushings are made for a safer, more predictable vehicle. It uses Whiteline synthetic elastomer bushings made for superior elasticity, memory and long lasting durability.
Not many know but worn suspension bushings have an effect on braking performance. In particular, these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Application
- NISSAN 1200 1970-1985 - 1200 B110, 120
- NISSAN 180B 1972-1977 - 180B P610 SEDAN AND COUPE
- NISSAN 180B 1975-1977 - 180B P610 WAGON
- NISSAN 200B 1977-1981 - 200B N810 SEDAN AND COUPE
- NISSAN 200B 1977-1981 - 200B N810 WAGON
- NISSAN DATSUN 1974-1980 - DATSUN 120Y B210 SEDAN AND WAGON
- NISSAN DATSUN 1974-1980 - DATSUN 120Y B210 COUPE
- NISSAN STANZA 1978-1983 - STANZA A10
- NISSAN SUNNY 1973-1982 - SUNNY B310 SEDAN AND WAGON
- NISSAN SUNNY 1979-1982 - SUNNY B310 VAN
Whiteline W81194
Specifications
Kit
| Kit type | Front Strut Bar To Chassis Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W81194 |
|---|---|
| EAN | 9319924356812 |
Whiteline W81194
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W81194
Vehicle fitment
8 vehicles| Vehicle | Years | Position |
|---|---|---|
| Nissan 1200B110 Sedan | 1970–1974 | Front |
| Nissan 1200B120 Ute | 1971–1985 | Front |
| Nissan 120YB210 | 1974–1979 | Front |
| Nissan 180B610Suits OEM bushing with crush tube | 1972–1977 | Front |
| Nissan Datsun 200BN810 Sedan and Coupe | 1977–1981 | Front |
| Nissan Datsun 200BN810 Wagon | 1977–1981 | Front |
| Nissan Stanza710, A10 | 1978–1982 | Front |
| Nissan SunnyB310, VB310 | 1979–1983 | Front |
No vehicles match.
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.













