Measurements (mm)× 4in kit
- Outer diameterOD40.5 mm
- Inner diameterID22.2 mm
- Length27.3 mm
- Flange thicknessFL10 mm
Centre tubeOD × ID × length, mm22.2 × 17 × 62× 2
Whiteline front strut bar to chassis bush kit
Key specs
- PositionFront axle
- Install time2 hours
- Supplied as1 kit4 bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this strut bar to chassis bush kit
The Whiteline W81507 front strut bar to chassis bush kit is designed to boost handling and performance, while optimising suspension geometry, the perfect, complete upgrade. Worn suspension bushings affect braking performance, and these long-lasting synthetic elastomer bushings are made for a safer, more predictable vehicle. It uses Whiteline synthetic elastomer bushings made for superior elasticity, memory and long lasting durability.
Not many know but worn suspension bushings have an effect on braking performance. In particular, these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long-lasting durability for a safer more predictable vehicle.
Note - Crush tube 62mm Length
Application
- HOLDEN JACKAROO 1985-1992 - UBS16, 17, 55
- HOLDEN RODEO 1988-2003 - TFS 2WD
- KIA CARNIVAL 1999-2007 - KV
- NISSAN 720 1980-1986 - 720 CG 4WD
- NISSAN CABSTAR 1982-1992 - F22
- NISSAN DATSUN 1978-1983 - 280C P330, P430
- NISSAN DATSUN 1986-2008 - D21 4WD
- NISSAN DATSUN 1986-1997 - D21 2WD
- NISSAN NAVARA 1986-1997 - D21 2WD
- NISSAN NAVARA 1997-2015 - D22 2WD
- NISSAN NAVARA 4WD 1986-1997 - D21 4WD
- NISSAN PATHFINDER 1986-1995 - WD21
- NISSAN TERRANO 1993-2007 - II R20
- NISSAN URVAN 1980-1986 - E23
- NISSAN URVAN 1987-1993 - E24
- TOYOTA DYNA 1985-1995 - 100 YH81
- TOYOTA DYNA 1985-1995 - YH81
- TOYOTA HIACE 1983-1989 - LH5#, 6#, 7#, YH5#, 6#, 7#
Whiteline W81507
Specifications
Kit
| Kit type | Front Strut Bar To Chassis Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W81507 |
|---|---|
| EAN | 9319924357048 |
Whiteline W81507
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W81507 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W81507
Vehicle fitment
21 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front1 vehicle-specific noteSold as differs on 6 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Strut Rod - To Chassis Bushing Kit. 6 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Crush tube 62mm L
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Holden JackarooUBS I | 1981–1992 | Front |
| Holden RodeoTFR 2WD | 1988–2003 | Front |
| Isuzu BighornUBS I | 1984–1991 | Front |
| Isuzu TrooperUBS | 1981–1991 | Front |
| KIA CarnivalUP, GQ | 1999–2006 | Front |
| Nissan 720720Sold as: Control Arm Lower - Inner Rear Bushing Kit | 1980–1986 | Front |
| Nissan CaravanE23 | 1980–1987 | Front |
| Nissan CaravanE24 | 1986–2001 | Front |
| Nissan NavaraD21 2WD | 1985–1999 | Front |
| Nissan NavaraD21 4WDSold as: Control Arm Lower - Inner Rear Bushing Kit | 1985–1999 | Front |
| Nissan NavaraD22 2WD | 1997–2015 | Front |
| Nissan PathfinderWD21Sold as: Control Arm Lower - Inner Rear Bushing Kit | 1986–1995 | Front |
| Nissan Pick UP720Sold as: Control Arm Lower - Inner Rear Bushing Kit | 1980–1986 | Front |
| Nissan Pick UPD21Sold as: Control Arm Lower - Inner Rear Bushing Kit, Strut Rod - To Chassis Bushing Kit | 1985–1999 | Front |
| Nissan Pick UPD22 | 1997–2014 | Front |
| Nissan Terrano IIR20Sold as: Control Arm Lower - Inner Rear Bushing Kit | 1996–2000 | Front |
| Nissan UrvanE23 | 1980–1987 | Front |
| Nissan UrvanE24 | 1987–1997 | Front |
| Toyota Dyna 100YH81 | 1985–1995 | Front |
| Toyota DynaLH81, YH81 | 1985–1995 | Front |
| Toyota HiaceYH, LH 60, 70, 7117mm ID | 1983–1989 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
