Size 1× 4in kit
- Outer diameterOD46.6 mm
- Inner diameterID21 mm
- Length18 mm
Size 2× 4in kit
- Outer diameterODAI50.7mmAII34mm
- Inner diameterID21 mm
- Length18.4 mm
- Flange thicknessFL4.5 mm
Whiteline front crossmember to chassis mount bush kit
Key specs
- PositionFront axle
- Install time4 hours
- Kits required28 bushings, 4 tubes, 8 washers
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this crossmember to chassis mount bush kit
The Whiteline W91107 front crossmember to chassis mount bush kit replaces the bushings in the front subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. The kit comes with bushings, tubes and washers.
The Whiteline kit replaces the bushings in the front subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.
Application
- HOLDEN H SERIES 1971-1976 - HQ, HJ AND WAGON
- HOLDEN H SERIES 1971-1976 - HQ, HJ UTE, VAN, AND CAB CHASSIS
- HOLDEN H SERIES 1976-1980 - HX, HZ AND WAGON
- HOLDEN H SERIES 1976-1980 - HX, HZ UTE, VAN, AND CAB CHASSIS
- HOLDEN MONARO 1974-1976 - HQ, HJ
- HOLDEN MONARO 1976-1980 - HX, HZ
- HOLDEN STATESMAN 1980-1985 - WB
- HOLDEN SUNBIRD 1977-1978 - LX
- HOLDEN SUNBIRD 1978-1980 - UC
- HOLDEN TORANA 1975-1978 - LH, LX SUNBIRD
- HOLDEN TORANA 1974-1978 - LH, LX
- HOLDEN TORANA 1978-1979 - UC
- HOLDEN WB 1980-1985 - WB UTE AND VAN
Whiteline W91107
Specifications
Kit
| Kit type | Front Crossmember To Chassis Mount Bush Kit |
|---|---|
| Kits required | 2 |
| Components per kit | 8 Bushings, 4 Tubes, 8 Washers |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W91107 |
|---|---|
| EAN | 9319924357604 |
Whiteline W91107
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W91107 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W91107
Vehicle fitment
11 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| HDT StatesmanWB Magnum | 1980–1985 | Front |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One Tonner | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Front |
| Holden MonaroHQ, HJ | 1971–1976 | Front |
| Holden MonaroHX, HZ | 1976–1980 | Front |
| Holden StatesmanHQ, HJ | 1971–1976 | Front |
| Holden StatesmanHX, HZ | 1976–1980 | Front |
| Holden StatesmanWB | 1980–1985 | Front |
| Holden ToranaLH, LX, UC | 1974–1980 | Front |
| Holden WBUte and Panel Van | 1980–1985 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
