Size 1× 10in kit
- Outer diameterODAI51.7mmAII35.8mm
- Inner diameterID22 mm
- Length22 mm
- Flange thicknessFL6 mm
Size 2× 10in kit
- Outer diameterOD46.8 mm
- Inner diameterID22 mm
- Length16.7 mm
Whiteline body mount bush kit
Key specs
- PositionFront & rear
- Install time4 hours
- Supplied as1 kit20 bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this body mount bush kit
The Whiteline W91498 body mount bush kit is made tough and offers outstanding abrasion resistance, high load-bearing capability, flexibility, increased tensile strength, and chemical resistance to oil, grease, ozone, and weathering.
Whiteline bushings are made tough and offer outstanding abrasion resistance, high load-bearing capability, flexibility, increased tensile strength, and chemical resistance to oil, grease, ozone, and weathering.
Application
- HOLDEN H SERIES 1971-1976 - HQ, HJ AND WAGON
- HOLDEN H SERIES 1971-1976 - HQ, HJ UTE, VAN AND CAB CHASSIS
- HOLDEN H SERIES 1976-1980 - HX, HZ AND WAGON
- HOLDEN H SERIES 1976-1980 - HX, HZ UTE, VAN AND CAB CHASSIS
- HOLDEN MONARO 1974-1976 - HQ, HJ
- HOLDEN MONARO 1976-1980 - HX, HZ
Whiteline W91498
Specifications
Kit
| Kit type | Body Mount Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 20 Bushings |
Fitting
| Fitting position | Front & Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W91498 |
|---|---|
| EAN | 9319924468881 |
Whiteline W91498
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W91498 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W91498
Vehicle fitment
7 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front & RearNo vehicle-specific notes
| Vehicle | Years | Position |
|---|---|---|
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One Tonner | 1971–1976 | Front & rear |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Front & rear |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Front & rear |
| Holden MonaroHQ, HJ | 1971–1976 | Front & rear |
| Holden MonaroHX, HZ | 1976–1980 | Front & rear |
| Holden StatesmanHQ, HJ | 1971–1976 | Front & rear |
| Holden StatesmanHX, HZ | 1976–1980 | Front & rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
