Measurements (mm)× 1in kit
- Outer diameterOD26 mm
- Inner diameterID16 mm
- Length24.5 mm
- Flange thicknessFL3 mm
Centre tubeOD × ID × length, mm16 × 10.2 × 24× 1
Whiteline engine pitch mount
Key specs
- PositionFront axle
- Install time1 hour
- Supplied as1 kit3 insert bushings, 1 tube
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this engine pitch mount
The Whiteline W92832 engine pitch mount bush kit is designed to enhance steering response, delivering sharper handling and more predictable vehicle dynamics, the perfect, complete upgrade. Low compliance bushing technology eliminates the slop, twisting and shudder of OEM rubber for a faster, more positive, responsive feel.
Subaru designed the pitch stop mount to assist in controlling the engine and drivetrain's forward and aft twisting motion. The pitch stop is inherently soft due to the plastic body and high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's Billet 6061-T6 aluminum pitch stop mounting is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilizing low compliance bushing technology eliminates the slop, twisting, and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Notes - Inserts - suits plastic pitch arm
Application
- SUBARU IMPREZA 1992-2000 - GC, GF Sedan and Wagon
- SUBARU IMPREZA 2000-2009 - GD Sedan
- SUBARU IMPREZA 2000-2007 - GG Wagon
- SUBARU IMPREZA 2007-2011 - GE, GH Sedan and Hatch
- SUBARU IMPREZA 2011-2016 - GJ, GP
- SUBARU IMPREZA WRX 1992-2000 - WRX GC, GF Sedan and Wagon
- SUBARU IMPREZA WRX 2000-2008 - WRX GD Sedan
- SUBARU IMPREZA WRX 2000-2008 - WRX GG Wagon
- SUBARU IMPREZA WRX 2007-2011 - WRX GE, GH Sedan and Hatch
- SUBARU IMPREZA WRX 2011-2014 - WRX GV, GR Sedan and Hatch
- SUBARU IMPREZA WRX 2014-2021 - WRX VA Sedan
- SUBARU IMPREZA WRX STI 1992-2000 - WRX STI GC, GF Sedan and Wagon
- SUBARU IMPREZA WRX STI 2001-2005 - WRX Sti GD Sedan
- SUBARU IMPREZA WRX STI 2005-2007 - WRX Sti GD Sedan
- SUBARU IMPREZA WRX STI 2007-2011 - WRX STi GE, GH Sedan and Hatch
- SUBARU IMPREZA WRX STI 2011-2014 - WRX STi GV, GR Sedan and Hatch
- SUBARU IMPREZA WRX STI 2014-2021 - WRX STi VA Sedan
- SUBARU XV 2011-2017 - GP
Whiteline W92832
Specifications
Kit
| Kit type | Engine Pitch Mount - Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 3 Insert Bushings, 1 Tube |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1 hour |
| Wheel alignment required | Yes |
Identifiers
| SKU | W92832 |
|---|---|
| EAN | 9319924371884 |
Whiteline W92832
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W92832 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W92832
Vehicle fitment
18 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notes
Applies to every vehicle unless flagged
- Insert
- Suits plastic pitch arm
| Vehicle | Years | Position |
|---|---|---|
| Subaru ImprezaGC, GF Sedan and Wagon | 1992–2000 | Front |
| Subaru ImprezaGD Sedan | 2000–2007 | Front |
| Subaru ImprezaGE, GH Sedan & Hatch | 2007–2011 | Front |
| Subaru ImprezaGG Wagon | 2000–2007 | Front |
| Subaru ImprezaGJ, GP Sedan and Hatch | 2011–2016 | Front |
| Subaru ImprezaWRX GC, GF Sedan & Wagon | 1992–2000 | Front |
| Subaru ImprezaWRX GD Sedan | 2000–2008 | Front |
| Subaru ImprezaWRX GE, GH Sedan & Hatch | 2007–2011 | Front |
| Subaru ImprezaWRX GG Wagon | 2000–2008 | Front |
| Subaru ImprezaWRX GV, GR Sedan and Hatch | 2011–2014 | Front |
| Subaru ImprezaWRX STi GC, GF Sedan & Wagon | 1992–2000 | Front |
| Subaru ImprezaWRX STi GD Sedan | 2001–2005 | Front |
| Subaru ImprezaWRX STi GD Sedan | 2005–2007 | Front |
| Subaru ImprezaWRX STi GR Hatch | 2008–2011 | Front |
| Subaru ImprezaWRX STi GV, GR Sedan and Hatch | 2011–2014 | Front |
| Subaru WRXWRX STi VA Sedan | 2014–2021 | Front |
| Subaru WRXWRX VA Sedan | 2014–2021 | Front |
| Subaru XVGP | 2012–2017 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
