Measurements (mm)× 2in kit
- Outer diameterOD60.4 mm
- Inner diameterID19 mm
- Length38.5 mm
- Flange thicknessFL30 mm
- Flange outer diameterFLOD58 mm
Centre tubeOD × ID × length, mm19 × 12.6 × 38× 2
Whiteline rear diff, mount rear bushing kit
Key specs
- PositionRear axle
- Install time4 hours
- Supplied as1 kit2 shell bushings, 2 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this part
The Whiteline W92956 rear diff mount rear bushing kit is designed to create a consistent drive no matter the surface, the perfect, complete upgrade. Whiteline's differential bushing solutions maintain pinion angles while delivering an improved gear shift, reduced initial torque loss and greater power transfer to the wheels.
Note - Support bracket
Whiteline W92956
Specifications
Kit
| Kit type | Rear Diff - Mount Rear Bushing Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Shell Bushings, 2 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W92956 |
|---|---|
| EAN | 9319924358229 |
Whiteline W92956
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W92956 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W92956
Vehicle fitment
6 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Support bracket
| Vehicle | Years | Position |
|---|---|---|
| Mitsubishi AirtrekZE, ZF | 2003–2006 | Rear |
| Mitsubishi LancerCC GSR | 1992–1996 | Rear |
| Mitsubishi LancerEVO 1, 2, 3 | 1992–1996 | Rear |
| Mitsubishi LancerEVO 4, 5, 6 | 1996–2001 | Rear |
| Mitsubishi LancerEVO 7, 8, 9 | 2001–2007 | Rear |
| Mitsubishi OutlanderZE, ZF | 2003–2006 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
