Measurements (mm)× 4in kit
- Outer diameterOD71.8 mm
- Inner diameterID23.8 mm
- Length29.5 mm
- Flange thicknessFL1.8 mm
- Flange outer diameterFLOD78 mm
Centre tubeOD × ID × length, mm24 × 14 × 45× 2
Whiteline rear diff, front mount bush kit
Key specs
- PositionRear axle
- Install time2.5 hours
- Supplied as1 kit4 bushings, 2 tubes, 3 washers
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The Whiteline W93402 rear diff front mount bush kit is a critical service item for the rear suspension. Steel-cased design and dampening zones ensures optimum performance and superior durability to original equipment. The kit comes with bushings, tubes and washers.
Whiteline W93402
Specifications
Kit
| Kit type | Rear Diff - Front Mount Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Bushings, 2 Tubes, 3 Washers |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 2.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W93402 |
|---|---|
| EAN | 9319924388677 |
Whiteline W93402
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W93402 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W93402
Vehicle fitment
17 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear4 vehicle-specific notes
Applies to every vehicle unless flagged
- Fitter friendly design
- Excludes models with 30mm extension on differential support on drivers side
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Ford FairlaneBA, BF | 2003–2007 | Rear |
| Ford FairmontBA, BF | 2002–2008 | Rear |
| Ford FalconBA, BF Sedan | 2002–2008 | Rear |
| Ford FalconFG, FGX SedanFitter friendly design | 2008–2017 | Rear |
| Ford LTDBA, BF | 2003–2007 | Rear |
| Ford TerritorySX, SY AWD | 2004–2011 | Rear |
| Ford TerritorySX, SY RWD | 2004–2011 | Rear |
| Ford TerritorySZ AWD | 2011–2016 | Rear |
| Ford TerritorySZ RWD | 2011–2016 | Rear |
| FPV F6 SeriesBA Typhoon | 2004–2006 | Rear |
| FPV F6 SeriesFG SedanFitter friendly design | 2008–2014 | Rear |
| FPV F6XSY | 2008–2009 | Rear |
| FPV Force 6BF Sedan | 2005–2007 | Rear |
| FPV Force 8BF Sedan | 2005–2007 | Rear |
| FPV GSFG SedanFitter friendly design | 2009–2014 | Rear |
| FPV GT SeriesBA, BF GT, GT-E, GT-P, COBRA Sedan | 2003–2008 | Rear |
| FPV GT SeriesFG GT, GT-E, GT-F, GT-P SedanFitter friendly design | 2010–2014 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
