About KONI 4WD shocksTechnology, adjustment, warranty and the full range
A complete 50mm lift for the LandCruiser 200 Series, built around KONI RAID shocks. RAID builds on KONI Heavy Track with more size and strength for the toughest offroad conditions, and is trusted worldwide in the harshest environments.
The KONI shocks are paired with matched springs and supporting components from other trusted brands, including King Springs coils and SuperPro strut mounts in preassembled ReadyStruts, and King Springs rear coil springs. See every part in the What's in the kit tab.
Why KONI RAID shocks
- Heavy-duty construction. A 2.5mm thick steel body, twin-tube design and robust attachment fittings, built to OEM tolerances for installation. RAID is designed to keep working even if the outer body is deformed by a rock strike.
- Twin-tube, more oil. An inner working cylinder is paired with an outer reserve tube. The extra oil capacity helps the shock shed heat faster than standard shocks and resist fade on long, rough stretches, and the outer tube adds protection against rock strikes and debris.
- User adjustable rebound. Digressive rebound adjustment lets you tune each shock for terrain, payload, spring rates or conditions.
- Tuned for the application. KONI precision-tunes every shock for its application, calibrated to suspension geometry, vehicle weight and real-world off-road use.
- Manufactured in Europe. Built by KONI, a market leader in suspension technology.
ReadyStrut front end
The front comes as a pair of preassembled ReadyStruts: the front shock, a King Springs coil matched to your front load (no bar, alloy bar, or steel bar with or without a winch) and SuperPro strut mounts, assembled ready to fit.
KDSS-equipped vehicles
If your 200 Series has KDSS (Kinetic Dynamic Suspension System), the system must be opened before the struts and springs are changed, then closed and re-levelled after fitting. Never drive with the KDSS valves open. Our KDSS adjusting and levelling guide walks your fitter through it.
Ride, handling and load
Whether you're crawling rocks, running corrugated roads or loaded up for overland travel, RAID's damping is calibrated to match the vehicle, for long-lasting performance and control.
- Matched to your load. The springs create the lift, so choose your front load, engine type and rear load when you build your kit. Getting this right gives a level stance and a comfortable ride, and stops the rear sagging.
- Accessories first. Where possible, fit permanent accessories like bars, winches, drawers and canopies before the lift kit so the suspension is matched correctly from the start.
- Professional fitting. We recommend installation by a suspension technician or mechanic, preferably with wheel alignment facilities.
Who it suits
200 Series owners who want one setup that does it all: daily driving, touring, towing and off-road. Check your vehicle in the Vehicle Fitment tab before you order.
What's in the kit
Every part in this kit, matched to your choices
Some parts are out of stock. This may delay dispatch.
-
Preassembled Ready Struts× 2
CRUS130-KR
Each includes
- Front Shocks
- Front Strut Mounts
Replaced by KDSS offset springs
Front SpringsMatches Front LoadChoose Front Load above to see which one is included
- KDSS Front SpringsMatches Front Load
Choose Front Load above to see which one is included
-
Rear Shock Absorbers× 2
-
Rear SpringsMatches Rear Load
Choose Rear Load above to see which one is included
-
KDSS Sway Bar Link Matches KDSS
Added as its own line in your cart, matched to your KDSS + SuperPro TRC4308 link choice. Your order includes our KDSS adjusting and levelling guide.
-
KDSSMatches KDSS
You'll open and re-level the KDSS yourself after fitting. Your order includes our KDSS adjusting and levelling guide.
We build your ReadyStruts with the KDSS offset front spring. Your order includes our KDSS adjusting and levelling guide.
KONI lift kit warranty
3 year / 60,000kmKONI lift kits are covered by a 3 year / 60,000km warranty. The standard warranty conditions below apply.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Improper installation
- Abuse, or damage due to collision or neglect
- Modified or altered from the original design
- Corrosion or accelerated wear
- Used for an application it wasn't designed or advertised for
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
Fits these vehicles
1 vehicle
- Series / chassis
- 200 Series
- Years
- 2007-2021
- Drive
- 4WD
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Fitment notes
-
Approx. 50mm liftFinal front and rear height depends on your permanent accessories, constant load and intended use.
-
Match springs to your loadChoose Front Load, Engine Type and Rear Load when you build your kit, for a level stance and no rear sag.
-
KDSS-equipped vehiclesKDSS must be opened before the struts and springs are changed, then closed and re-levelled after fitting. Never drive with the KDSS valves open. See our KDSS adjusting and levelling guide.
-
Fit accessories firstWhere possible, fit bars, winches, drawers and canopies before the lift kit so the suspension is matched correctly.
-
Professional fitting recommendedWe recommend installation by a suspension technician or mechanic, preferably with wheel alignment facilities.
-
Wheel alignment requiredHave a wheel alignment done after fitting. We recommend a suspension technician or mechanic with alignment facilities.
Questions about fitment? Call 1800 292 911 before you order.
More for this vehicle
TOYOTA LAND CRUISER 2007-2021 200 SERIES
Fitment position: Front & Rear
Fitment position: Front & Rear
Fitment position: Front & Rear
Fitment position: Front & Rear