Measurements (mm)× 2in kit
- Outer diameterODAI68.6mmAII66.6mm
- Inner diameterID32.6 mm
- Length78 mm
- Flange thicknessFL46.64 mm
- Flange outer diameterFLOD16.25 mm
Centre tubeOD × ID × length, mm33 × 14 × 78× 2
SuperPro front control arm lower inner double offset bush kit
Key specs
- PositionFront axle
- Install time3 hours
- Supplied as1 kit
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this part
The SuperPro SPF3054K front control arm lower inner double offset bush kit is designed to maintain optimal alignment and make handling consistent, a complete, premium upgrade. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. It enhances your vehicle's handling and performance.
SuperPro SPF3054K
Alignment
- Alignment affectedCaster
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3054K
Specifications
Kit
| Kit type | Front Control Arm Lower Inner Double Offset Bush Kit |
|---|---|
| Kits required | 1 |
| Includes | 2 Control Arm Bushings, Tubes, Sleeves & 1 Instruction Sheet |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3054K |
|---|---|
| EAN | 9317745030546 |
SuperPro SPF3054K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3054K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3054K
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Front1 vehicle-specific note
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +0.5deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Chrysler 300 CLX, LEPerformance Alignment - Adds +0.5deg caster | 2004–2012 | Front |
| Dodge Challenger3rd Gen LX | 2008–2011 | Front |
| Dodge Charger6th Gen LX | 2005–2010 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
