Measurements (mm)× 2in kit
- Outer diameterOD40.2 mm
- Inner diameterID22 mm
- Length30 mm
Centre tubeOD × ID × length, mm25 × 12.3 × 3625 × 12.3 × 36× 2 / 2
SuperPro rear toe arm bush kit
Key specs
- PositionRear axle
- Install time4 hours
- Supplied as1 kit
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
About this toe arm bush kit
The SuperPro SPF3060XK rear toe arm bush kit (offset) is engineered for everyday reliability, a complete, premium upgrade. The bushings are unaffected by extreme temperatures, oils, water or coolant. Compared with rubber, the polyurethane gives higher quality, quieter and longer lasting bushings. SuperPro says its polyurethane bushings provide corrected or maintained steering geometry, better handling, increased safety and improved tyre wear.
SuperPro SPF3060XK
Alignment
- Alignment affectedToe
- Adjustment typeEccentric
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3060XK
Specifications
Kit
| Kit type | Rear Toe Arm Bush Kit - (Offset) |
|---|---|
| Kits required | 1 |
| Includes | 4 Toe Arm Bushings, Tubes, Sleeves & 1 Instruction Sheet |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3060XK |
|---|---|
| EAN | 9317745754428 |
SuperPro SPF3060XK
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Measurements (mm)× 2in kit
- Outer diameterOD40.2 mm
- Inner diameterID24.8 mm
- Length36 mm
- Flange thicknessFL5.5 mm
- Flange outer diameterFLOD42.2 mm
Centre tubeOD × ID × length, mm25 × 12.3 × 3625 × 12.3 × 36× 2 / 2
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3060XK is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3060XK
Vehicle fitment
3 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds toe correction
| Vehicle | Years | Position |
|---|---|---|
| Chrysler 300 CLX, LE | 2004–2012 | Rear |
| Dodge Challenger3rd Gen LX | 2008–2011 | Rear |
| Dodge Charger6th Gen LX | 2005–2010 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
