Measurements (mm)× 4in kit
- Outer diameterOD39.45 mm
- Inner diameterID19.7 mm
- Length38 mm
Centre tubeOD × ID × length, mm20 × 12.3 × 38× 4
SuperPro rear upper control arm bush kit
Key specs
- PositionRear axle
- Install time4 hours
- Supplied as1 kit
- AlignmentNeeded after fitting
- Engineering-grade polyurethane
- Unaffected by heat, oils, water and coolant
- Designed in Australia
Before you fit
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this upper control arm bush kit
The SuperPro SPF3064K rear upper control arm bush kit (offset) is engineered with strength and durability in mind, a complete, premium upgrade. The bushings use SuperPro's proprietary engineering-grade polyurethane formula. SuperPro positions the upgrade for enhanced performance, better alignment and increased service life. SuperPro says it enhances your vehicle's handling and performance.
SuperPro SPF3064K
Alignment
- Alignment affectedCamber
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
SuperPro SPF3064K
Specifications
Kit
| Kit type | Rear Upper Control Arm Bush Kit (Offset) |
|---|---|
| Kits required | 1 |
| Includes | 4 Control Arm Bushings, Tubes, Sleeves & 1 Instruction Sheet |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | SPF3064K |
|---|---|
| EAN | 9317745030645 |
SuperPro SPF3064K
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
SuperPro warranty
Lifetime warrantyBall joints, tie rod ends, Duroballs and links: 3 year / 60,000kmThis SuperPro part is covered by a lifetime warranty against manufacturing defects, for on-road, off-road, track and competition use. The warranty covers replacement of the original component only. Ball joints, tie rod ends, Duroballs and links are covered for 3 year / 60,000km.
This product: SPF3064K is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Finish, corrosion and normal wear
- Damage from installation, installation error or not aligning the wheels after fitting
- Labour and consequential costs
- Not fitted to the catalogue-listed application
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
SPF3064K
Vehicle fitment
7 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: Rear2 vehicle-specific notes
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 0.5deg camber
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| Chrysler 300 CLX, LEPerformance Alignment - Adds +0.5deg camber | 2004–2012 | Rear |
| Chrysler 300CLX, LD | 2011–2023 | Rear |
| Dodge Challenger3rd Gen LD | 2011–on | Rear |
| Dodge Challenger3rd Gen LX, Adds +0.5deg camber | 2008–2011 | Rear |
| Dodge Charger6th Gen LX | 2005–2010 | Rear |
| Dodge Charger7th Gen LX | 2010–on | Rear |
| Lancia ThemaLX | 2011–2014 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
