Measurements (mm)× 2in kit
- Outer diameterODAI49mmAII47.4mm
- Inner diameterID30 mm
- Length62 mm
- Flange thicknessFL6 mm
Centre tubeOD × ID × length, mm30 × 11.95 × 61× 4
Whiteline lower control arm, inner bush kit
Key specs
- PositionVaries by vehicleShown per vehicle in the table
- Install time2 hours
- Kits required22 shell bushings, 2 tubes, 2 bolts, 4 nuts
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- Fitting position differs between vehicles. Check the position shown for your vehicle in the table.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this part
The Whiteline W52491 lower control arm inner bush kit uses offset synthetic elastomer bushings to add camber adjustment while restoring worn bushes to as-new condition, improving vehicle stability, steering precision and braking efficiency.
Note - Performance Alignment - adds +/- 0.75deg camber
Whiteline W52491
Alignment
- Alignment affectedCamber
- Adjustment typeOffset
- Adjustable on the carNo
A wheel alignment is needed after fitting.
Whiteline W52491
Specifications
Kit
| Kit type | Front Lower Control Arm - Inner Bush Kit (Offset) |
|---|---|
| Kits required | 2 |
| Components per kit | 2 Shell Bushings, 2 Tubes, 2 Bolts, 4 Nuts |
Fitting
| Fitting position | Varies by vehicle |
|---|---|
| Install time | 2 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W52491 |
|---|---|
| EAN | 9319924353125 |
Diagram
Whiteline W52491
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyArm and bushes: lifetime. Ball joint: 3 year / 60,000km.This Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Arm and bushes: lifetime. Ball joint: 3 year / 60,000km.
This product: W52491 is protected by a lifetime warranty (ball joint: 3 year / 60,000km)
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W52491
Vehicle fitment
12 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
Position varies by vehicle (Front 11, Rear 1)3 vehicle-specific notesSold as differs on 3 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Bushing Kit, Trailing Arm Upper - Front Bushing Kit. 3 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Performance Alignment
- Adds +/- 0.75deg camber, Eccentric adjustable
- Pinion angle correction
Check before ordering
| Vehicle | Years | Position |
|---|---|---|
| HDT StatesmanWB Magnum | 1980–1985 | Front |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One TonnerSold as: Control Arm Lower - Bushing KitPerformance Alignment - Adds +/- 0.75deg camber | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Front |
| Holden MonaroHQ, HJ | 1971–1976 | Front |
| Holden MonaroHX, HZ | 1976–1980 | Front |
| Holden StatesmanHQ, HJ | 1971–1976 | Front |
| Holden StatesmanHX, HZ | 1976–1980 | Front |
| Holden StatesmanWB | 1980–1985 | Front |
| Holden ToranaLC, LJ, TASold as: Trailing Arm Upper - Front Bushing KitPerformance Alignment - Eccentric adjustable - Pinion angle correction | 1969–1974 | Rear |
| Holden ToranaLH, LX, UC | 1974–1980 | Front |
| Holden WBUte and Panel VanSold as: Control Arm Lower - Bushing KitPerformance Alignment - Adds +/- 0.75deg camber | 1980–1985 | Front |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
