Measurements (mm)× 2in kit
- Outer diameterOD120 mm
- Inner diameterID90 mm
- Length10 mm
Whiteline front spring spacer
Key specs
- PositionFront axle
- Install time1.5 hours
- Kits required21 bushing
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this spring spacer
The Whiteline W71476 front spring spacer is an economical solution for replacing deteriorated original units. It also compensates for a vehicle loaded on one side, which is common on 4x4s, and helps achieve the preferred ride height.
Note - 10mm ride height increase
Whiteline W71476
Specifications
Kit
| Kit type | Front Spring Spacer (10mm) |
|---|---|
| Kits required | 2 |
| Components per kit | 1 Bushing |
Fitting
| Fitting position | Front |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W71476 |
|---|---|
| EAN | 9319924355747 |
Whiteline W71476
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W71476 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
W71476
Vehicle fitment
14 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: FrontNo vehicle-specific notesSold as differs on 4 vehicles
Where the title changes by vehicle
For most vehicles this part is sold as Coil Spring Pad - Lower Bushing Kit. 4 vehicles have a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- 10mm ride height increase
| Vehicle | Years | Position |
|---|---|---|
| Ford FairmontXP SedanSold as: Coil Spring Pad - Upper Bushing Kit | 1965–1966 | Front |
| Ford FairmontXP WagonSold as: Coil Spring Pad - Upper Bushing Kit | 1965–1966 | Front |
| Ford FalconXK-XPSold as: Coil Spring Pad - Upper Bushing Kit | 1960–1966 | Front |
| Ford MustangClassic 1st GenSold as: Coil Spring Pad - Bushing Kit | 1964–1973 | Front |
| HDT StatesmanWB Magnum | 1980–1985 | Front |
| Holden H SeriesHQ, HJ, HX, HZ Ute, Panel Van and One Tonner | 1971–1976 | Front |
| Holden H SeriesHQ, HJ, SEDAN AND WAGON | 1971–1976 | Front |
| Holden H SeriesHX, HZ SEDAN AND WAGON | 1976–1980 | Front |
| Holden MonaroHQ, HJ | 1971–1976 | Front |
| Holden MonaroHX, HZ | 1976–1980 | Front |
| Holden StatesmanHQ, HJ | 1971–1976 | Front |
| Holden StatesmanHX, HZ | 1976–1980 | Front |
| Holden StatesmanWB | 1980–1985 | Front |
| Holden WBUte and Panel Van | 1980–1985 | Front |
No vehicles match.
Universal listing (not a vehicle)
Coil Spring Pad/Trim Packer - Bushing Kit. OD=120, ID=90, H=10mm
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
