- Outer diameterOD140 mm
- Inner diameterID32 mm
- Length10 mm
Whiteline rear spring spacer
Key specs
- PositionRear axle
- Install time1.5 hours
- Supplied as1 kit2 bushings
- AlignmentNeeded after fitting
- A wheel alignment is needed after fitting.
- Some vehicles have their own fitment note. Check your vehicle in the table before ordering.
About this spring spacer
The Whiteline W72044 rear spring spacer is an economical solution for replacing deteriorated original units. It also compensates for a vehicle loaded on one side, which is common on 4x4s, and helps achieve the preferred ride height.
Note - 14mm ride height increase - Lower
Whiteline W72044
Specifications
Kit
| Kit type | Rear Spring Spacer (14mm) |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Bushings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 1.5 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W72044 |
|---|---|
| EAN | 9319924356188 |
Whiteline W72044
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
ShippingWe do not ship lift kits to NT, WA or TAS.
W72044
Vehicle fitment
81 vehicles- 14mm ride height increase
| Vehicle | Years | Position |
|---|---|---|
| BMW 3 SeriesE36 (Excl. M3) | 1990–2000 | Rear |
| BMW 3 SeriesE36 M3 | 1992–1999 | Rear |
| BMW 3 SeriesE46 (Excl. M3) | 1997–2006 | Rear |
| BMW 3 SeriesE46 M3 | 2000–2006 | Rear |
| BMW Z1Roadster | 1988–1991 | Rear |
| BMW Z4E89 | 2009–2016 | Rear |
| HDT CommodoreVT Sport | 1997–2000 | Rear |
| HDT CommodoreVX Areo Signature | 2000–2002 | Rear |
| Holden AdventraVY | 2003–2004 | Rear |
| Holden AdventraVZ | 2004–2009 | Rear |
| Holden CalaisVP | 1991–1993 | Rear |
| Holden CalaisVR, VS | 1993–1997 | Rear |
| Holden CalaisVT | 1997–2000 | Rear |
| Holden CalaisVX | 2000–2002 | Rear |
| Holden CalaisVY | 2002–2004 | Rear |
| Holden CalaisVZ | 2004–2006 | Rear |
| Holden CalibraYE | 1991–1997 | Rear |
| Holden CapriceVQ | 1990–1994 | Rear |
| Holden CapriceVR, VS | 1994–1999 | Rear |
| Holden CapriceWH | 1999–2003 | Rear |
| Holden CapriceWK | 2003–2004 | Rear |
| Holden CapriceWL | 2004–2006 | Rear |
| Holden CommodoreVN, VP SedanSuits IRS models | 1988–1993 | Rear |
| Holden CommodoreVR, VS SedanSuits IRS models | 1993–1997 | Rear |
| Holden CommodoreVT Sedan and Wagon | 1997–2000 | Rear |
| Holden CommodoreVU Ute | 2000–2002 | Rear |
| Holden CommodoreVX Sedan and Wagon | 2000–2002 | Rear |
| Holden CommodoreVY Sedan and Wagon | 2002–2004 | Rear |
| Holden CommodoreVY Ute | 2002–2004 | Rear |
| Holden CommodoreVZ Sedan and Wagon | 2004–2007 | Rear |
| Holden CommodoreVZ Ute | 2004–2007 | Rear |
| Holden MonaroV2 | 2001–2004 | Rear |
| Holden MonaroVZ | 2004–2006 | Rear |
| Holden StatesmanVQ | 1990–1994 | Rear |
| Holden StatesmanVR, VS | 1994–1999 | Rear |
| Holden StatesmanWH | 1999–2003 | Rear |
| Holden StatesmanWK | 2003–2004 | Rear |
| Holden StatesmanWL | 2004–2006 | Rear |
| HSV AvalancheY SERIES WAGON | 2003–2004 | Rear |
| HSV AvalancheZ SERIES WAGON | 2004–2006 | Rear |
| HSV CapriceVR, VS | 1994–1996 | Rear |
| HSV ClubsportVP | 1991–1993 | Rear |
| HSV ClubsportVR-VS SEDAN | 1993–1997 | Rear |
| HSV ClubsportVT | 1997–2000 | Rear |
| HSV ClubsportVX | 2000–2002 | Rear |
| HSV ClubsportY SERIES | 2002–2004 | Rear |
| HSV ClubsportZ SERIES | 2004–2006 | Rear |
| HSV Coupe 4V2, Z SERIES | 2004–2006 | Rear |
| HSV GrangeVS | 1996–1999 | Rear |
| HSV GrangeWH | 1999–2003 | Rear |
| HSV GrangeWK | 2003–2004 | Rear |
| HSV GrangeWL | 2004–2006 | Rear |
| HSV GTOV2 COUPE | 2001–2004 | Rear |
| HSV GTOZ SERIES COUPE | 2002–2007 | Rear |
| HSV GTSV2 COUPE | 2001–2004 | Rear |
| HSV GTSVR, VS | 1993–1997 | Rear |
| HSV GTSVT | 1997–2000 | Rear |
| HSV GTSVX | 2000–2002 | Rear |
| HSV GTSY SERIES | 2002–2007 | Rear |
| HSV MalooVU | 2001–2002 | Rear |
| HSV MalooY SERIES | 2002–2004 | Rear |
| HSV MalooZ SERIES | 2004–2007 | Rear |
| HSV MantaVS SEDAN | 1995–1997 | Rear |
| HSV MantaVT | 1997–1999 | Rear |
| HSV SenatorVP | 1992–1993 | Rear |
| HSV SenatorVR, VS | 1993–1997 | Rear |
| HSV SenatorVT | 1997–2000 | Rear |
| HSV SenatorVX | 2000–2002 | Rear |
| HSV SenatorY SERIES | 2002–2004 | Rear |
| HSV SenatorZ SERIES | 2004–2006 | Rear |
| HSV StatesmanVQ | 1990–1993 | Rear |
| HSV StatesmanVR, VS | 1994–1996 | Rear |
| HSV SV300VX | 2001–2001 | Rear |
| HSV SV6000Z SERIES | 2005–2006 | Rear |
| HSV SV99VT | 1999–2000 | Rear |
| HSV XU6VT | 1998–2000 | Rear |
| HSV XU6VX | 2000–2002 | Rear |
| HSV XU8VT | 1999–1999 | Rear |
| Opel VectraA | 1988–1995 | Rear |
| Toyota LexcenVN, VP SedanSuits IRS models | 1987–1993 | Rear |
| Toyota LexcenVR, VS SedanSuits IRS models | 1993–1997 | Rear |
No vehicles match.
Coil Spring Pad/Trim Packer - Bushing Kit. OD=140, ID=32, H=10mm
Does this fit my car?
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.















