Measurements (mm)× 2in kit
- Outer diameterOD59 mm
- Inner diameterID35 mm
- Length39.5 mm
Whiteline rear diff, rear mount bush kit
Key specs
- PositionRear axle
- Install time4 hours
- Supplied as1 kit2 shell bushings
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
About this part
The Whiteline KDT913 rear diff rear mount bush kit is designed to balance comfort with performance while minimising noise and vibrations, the perfect, complete upgrade. Whiteline's differential bushing solutions maintain pinion angles while delivering an improved gear shift, reduced initial torque loss and greater power transfer to the wheels.
Note - Suits models with rear 2 bolt mounts
Whiteline KDT913
Specifications
Kit
| Kit type | Rear Diff - Rear Mount Bush Kit |
|---|---|
| Kits required | 1 |
| Components per kit | 2 Shell Bushings |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 4 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | KDT913 |
|---|---|
| EAN | 9319924384761 |
Whiteline KDT913
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: KDT913 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
KDT913
Vehicle fitment
11 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notes
Applies to every vehicle unless flagged
- Suits models with rear 2 bolt mounts
| Vehicle | Years | Position |
|---|---|---|
| Nissan 200SXS14 | 1993–1999 | Rear |
| Nissan 200SXS15 | 2000–2003 | Rear |
| Nissan 300ZXZ32 | 1989–1997 | Rear |
| Nissan SilviaS14 | 1993–1999 | Rear |
| Nissan SkylineR32 AWD | 1989–1993 | Rear |
| Nissan SkylineR32 RWD | 1989–1993 | Rear |
| Nissan SkylineR33 AWD | 1993–1998 | Rear |
| Nissan SkylineR33 RWD | 1993–1998 | Rear |
| Nissan SkylineR34 AWD | 1998–2000 | Rear |
| Nissan SkylineR34 RWD | 1998–2000 | Rear |
| Nissan StageaWGNC34 AWD | 1996–2001 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
