Measurements (mm)× 8in kit
- Outer diameterOD33 mm
- Inner diameterID21.1 mm
- Length21.5 mm
- Flange thicknessFL5 mm
- Flange outer diameterFLOD37 mm
Centre tubeOD × ID × length, mm22.2 × 12.3 × 45× 4
Whiteline rear lower control arm bush kit
Key specs
- PositionRear axle
- Install time3 hours
- Supplied as1 kit4 shell bushings, 4 tubes
- AlignmentNeeded after fitting
Before you fit
- A wheel alignment is needed after fitting.
- The part supplied is named differently on some vehicles (shown as 'Sold as' in the table).
About this lower control arm bush kit
The Whiteline W62925 rear lower control arm bush kit is designed to greatly increase control and confidence, the perfect, complete upgrade. Failed suspension bushings can cause uneven tyre wear, unbalanced braking and a less predictable vehicle in corners, and replacing them gives a safer, more predictable vehicle. It uses Whiteline synthetic elastomer bushings made for superior elasticity, memory and long lasting durability.
Whiteline W62925
Specifications
Kit
| Kit type | Rear Lower Control Arm Bush Kit (45mm) |
|---|---|
| Kits required | 1 |
| Components per kit | 4 Shell Bushings, 4 Tubes |
Fitting
| Fitting position | Rear |
|---|---|
| Install time | 3 hours |
| Wheel alignment required | Yes |
Identifiers
| SKU | W62925 |
|---|---|
| EAN | 9319924354818 |
Whiteline W62925
Bush dimensions
All sizes in millimetres. The letters on each drawing match the letters on the measurements beside it.
Whiteline warranty
Lifetime warrantyBall joints, tie rod ends, bearings, links and springs: 3 year / 60,000kmThis Whiteline part is covered by a lifetime warranty against manufacturing defects. The warranty covers replacement of the original component only. Ball joints, tie rod ends, bearings, links and springs are covered for 3 year / 60,000km.
This product: W62925 is protected by a lifetime warranty
Our warranty is in addition to your rights under the Australian Consumer Law.
Proof of purchase
Proof of purchase is required, such as your order number. Keep the part and any related components until your claim is finalised.
Common exclusions
- Normal wear and tear
- Misuse
- Incorrect installation
- Not purchased from Northman
How to make a claim
Fill in the Warranty Request form with your order number, the product, your vehicle details, how the vehicle is used and a description of the problem.
We'll reply within 3–5 business days and ask for clear photos or videos of the part, the problem area and how it's fitted.
Most claims are diagnosed from photos or videos.
W62925
Vehicle fitment
14 vehicles
Choose your vehicle to check fitmentWe’ll tell you if this fits and where it goes.
One position: RearNo vehicle-specific notesSold as differs on 1 vehicle
Where the title changes by vehicle
For most vehicles this part is sold as Control Arm Lower - Bushing Kit. 1 vehicle has a different listing, marked Sold as in the table. Check which one you need before ordering.
Applies to every vehicle unless flagged
- Crush tube 45mm L
| Vehicle | Years | Position |
|---|---|---|
| Nissan 180SXS13 | 1988–1996 | Rear |
| Nissan 200SXS14 | 1993–1999 | Rear |
| Nissan 200SXS15 | 2000–2003 | Rear |
| Nissan 300ZXZ32 | 1989–1997 | Rear |
| Nissan BluebirdU13Sold as: Control Arm Lower Front - Bushing Kit | 1993–1997 | Rear |
| Nissan SilviaS13 | 1988–1996 | Rear |
| Nissan SilviaS14 | 1993–1999 | Rear |
| Nissan SkylineR32 AWD | 1989–1993 | Rear |
| Nissan SkylineR32 RWD | 1989–1993 | Rear |
| Nissan SkylineR33 AWD | 1993–1998 | Rear |
| Nissan SkylineR33 RWD | 1993–1998 | Rear |
| Nissan SkylineR34 AWD | 1998–2000 | Rear |
| Nissan SkylineR34 RWD | 1998–2000 | Rear |
| Nissan StageaWGNC34 AWD | 1996–2001 | Rear |
No vehicles match.
Does this fit my car?
Your vehicle
Pick any vehicle. If it is not on this product's fitment list, we cannot guarantee fitment.
Questions about fitment? Call 1800 292 911 before you order.
